Cambridge Vacuum Engineering

630 Silver St Suite 7A
Agawam,  MA  01001-2940

United States
413-789-4600
http://www.camvaceng.com
  • Booth: C41544


 Products

  • EBFLOW
    Offers the possibility of eliminating the need for a vacuum chamber and has been developed by CVE for the joining of large structures particularly aimed at the renewable energy generation sectors. Sample welds available to see at the booth....

  • EBFLOW main advantages:

    • Single pass, single inspection

    • Achieving the fastest thick section welding rates ever

    • Facilitating very high joint completion rates in thick section steels

    • A coarse vacuum is established and maintained only where it is needed

    • No cooldown period prior to NDT inspection needed

    • Pre-heating is not necessary and consumables are not required during the weld

    • Quality and reliability are improved with immediate post weld inspection possible

    • 20 to 30 times faster than conventional submerged arc welding, 100mm per minute in 150mm thick steel have been achieved

    • Using a system of sliding seals and precision handling enables fast longitudinal and circumferential welds on large work pieces 

    • There is no filler wire, the autogenous weld can be heat treated and the weld rendered invisible. It cannot be found using most methods of QC.

    • This technology has been demonstrated to weld thick sections up to 250mm in steels and light alloys.

PLEASE NOTE -- Supported browsers are: Internet Explorer - 10.0 and higher; Chrome - 55.0 and higher; Firefox - 50.0 and higher; Safari - 5.0 and higher. This program does not support compatibility view to run older browser software. Please make sure you are using the most up to date browser version to ensure complete use of the website.