Allstate Saws & Machining LLC

851 Sard Ave
Aurora,  IL  60506-5943

United States
630-892-7297
http://www.allstatesaws.com
  • Booth: C41119


 Products

  • Trennjaeger LTS 520 Traversing Cold Saw
    LTS 520 Cold Saw for straight and miter cutting of structural profiles, solids, plates, pipes & tubes. Capacity is 7" high and up to 20" long that miters 45 & 30 deg. left or right. The variable speed saw motor gives saw blade speeds of 12 to 100m/min....

  • In the standard version, the LTS 520 is suitable for straight and miter cutting of structural profiles, solids, plates, pipes & tubes.  The machine stand is of welded steel construction, with an integrated swivel base.  Mechanical stops are provided at ninety degrees (for straight cuts) & at forty-five & thirty degrees for miter cutting in both directions, left or right.  The degree of miter is displayed digitally to one-tenth of a degree, so that the operator may position the saw precisely.

    The machine’s gearbox is mounted below the saw table & travels horizontally on precision ground & hardened guide ways.  The LTS 520 employs an all spur & helical gear train, which operates in a constant oil bath.  Gear shafts are journaled in heavy-duty roller bearings, to provide the smoothest & most efficient possible method of power transmission.

    The saw motor is 1.6/2.8kw two speed electric motor that will give saw blade speeds of 29 and 58 m/min with an optional stepless drive offering 12 to 100m/min blade speed.

    Other machine features, which serve to minimize vibration while cutting, are the saw’s thick working table & powerful pneumatic clamps.  The material being sawn is clamped horizontally & vertically to ensure that it is positively secured.  The width of the clamping range is normally zero to 16-3/4 inches, but by exchanging the pressure piece on the horizontal clamp, the range can be increased to 20-1/2 inches.  This auxiliary pressure piece is furnished with the machine & is also useful when acute miters are performed.

PLEASE NOTE -- Supported browsers are: Internet Explorer - 10.0 and higher; Chrome - 55.0 and higher; Firefox - 50.0 and higher; Safari - 5.0 and higher. This program does not support compatibility view to run older browser software. Please make sure you are using the most up to date browser version to ensure complete use of the website.