Phillips Precision Inc

Boylston,  MA 
United States
http://www.fixture-up.com
  • Booth: 1209

Phillips Precision, Inc. of Boylston, Mass is a full-service machine shop specializing in short-run production and complex prototypes for any industry. Phillips Products Division designs, develops and markets work-holding products for manufacturers.

Inspection Arsenal™ for CMM inspection, Open-Sight™ for Vision inspection AND Laser Arsenal™ for laser engraving fixtures is a modular, magnetically interlocking, easy to implement, quick-swap fixture solution designed to help break workflow bottlenecks! You are guaranteed to process more parts per shift with these LEAN, low-cost solutions. 


 Show Specials

  • Inspection Arsenal™ New Equipment Program
    Receive deeper discounts on fixturing ordered for your new equipment!
    Show us proof of purchase for a new CMM for a
    FREE Loc-N-Load™ docking rail of your choice!
    Offer good through June 30!

    New CMM? Enhance your investment with the LEANest, most affordable inspection fixture solution! Click-to-lock, quick-swap, modular plates improve and simplify your inspection process. And you can start out by saving $280-$360!
     

     

    Proof of Purchase is all you need to receive a FREE Loc-N-Load™ docking rail of your choice! Valued from $280-$360! 

    It's as simple as 1-2-3:

    1. Email a copy of your proof of purchase to: kevin@fixture-up.com or click on the button below to upload your photo to our website... or mail a photo to the address below
    2. Order any one of these bundled systems and receive a docking rail FREE!
    3. At checkout, enter the Coupon Code associated with the size bundle you order:  FREE12, FREE18, FREE30 and your order will be discounted for the value of the docking rail. 

    Click here to watch the inventor demonstrate this quick-swap fixture system.  

     

    Same concept as a favorite toy.
    Interlocking segments mean inspection set-ups can be separated and moved like puzzle pieces without breaking down and rebuilding.  One-piece grid plates can be expensive and limiting. Start with the LEANest, most relevant inspection technique on the market!

     

    Questions about which bundled system you should order?  Call us at 508-869-0373 or email cphillips@fixture-up.com.  Thirty inch system shown - also available in 12" and 18" sizes and in 9 combinations. 

     
     
     

     

  • Inspection Arsenal™ Surrender Program
    Out with the old and in with the new! Surrender your outdated
    1-piece grid plates for a FREE Loc-N-Load™ docking rail of your choice!
    Offer good through June 30.

    How can modular, interlocking, quick-swap plates improve and simplify your CMM inspection process? How can one photo be worth $280-$360? Find out...
    Surrender your outdated 1-piece grid plates for a FREE Loc-N-Load™ docking rail of your choice! Valued from $280-$360! 

    Now through March 31, email, snail mail or upload a photo of your 1-piece grid plate to our website and we'll send you a FREE docking rail with any bundle purchase. No need to physically send us your plate.

    It's as simple as 1-2-3:

    1. Email a photo of your 1-piece grid plate to: kevin@fixture-up.com or click on the button below to upload your photo to our website... or mail a photo to the address below
    2. Order any one of these bundled systems and receive a docking rail FREE!
    3. At checkout, enter the Coupon Code associated with the size bundle you order:  FREE12, FREE18, FREE30 and your order will be discounted for the value of the docking rail. 

    Click here to watch the inventor demonstrate this quick-swap fixture system.  

     

    Same concept as a favorite toy.
    Interlocking segments mean inspection set-ups can be separated and moved like puzzle pieces without breaking down and rebuilding.  Convert to the LEANest, most relevant inspection technique on the market and start unlocking hidden profits. 

    Questions about how how to "surrender" or which bundled system you should order?  Call us at 508-869-0373 or email cphillips@fixture-up.com.  Thirty inch system shown - also available in 12" and 18" sizes and in 9 combinations. 


 Press Releases

  • Phillips Precision Products Division, Boylston, MA - Now, the technique altering, quick-swap concept of Inspection Arsenal™ Loc-N-Load™ plates will be available in metric. Launching initially in Europe, the metric system can now help make fundamental inspection improvements worldwide. Whether a small job shop or a large manufacturer, Loc-N-Load™ breaks inspection bottlenecks saving companies tens of thousands of dollars in faster inspections.

    Metric plates are available in 3 length docking rails of 360mm, 540mm, or 720mm. Rails easily install on any size CMM.  Four interlocking plates that are 180x180mm, 180x360mm, 360x360mm, and 360x540mm can be purchased individually or in pre-configured bundled sets which include a 48 piece work holding kit.  Accessory plates available are an angle plate which acts as a stop and provides access to the granite and a unique qualifying ball/bar plate which lets you qualify the probe and move the ball/bar out of the way!

    Inspection Arsenal™ complements other fixturing AND the value makes converting from other plates very cost effective. Contact the company at 508-869-0373 with questions. Visit www.fixture-up.com to learn about this industry changing fixture system.

     

  • Inspection Arsenal™ Quick-swap Fixtures complement the new zCAT Portable CMM.

    Inspection Arsenal™ is the only LEAN, quick-swap fixture system in the industry while the 30-lb. zCAT is an industry first, bringing automated, precise 2D and 3D measurements anywhere from shop floor to conference table.

    March 1, 2016 - Phillips Precision, Inc. of Boylston, MA and Fowler High Precision of Newton, MA each offer products that are fundamentally changing the way manufacturers inspect parts. By design, they create opportunities for a LEANer process that before now did not exist in the industry. The popular Inspection Arsenal™ quick-swap fixture system enhances the value of Fowlers new zCAT – the only truly portable DCC CMM.  Fowler and Phillips share the philosophy of presenting creative, high quality, affordable solutions that are made locally.

    New for the zCAT, a custom base was designed with four locations that accept Loc-N-Load™ quick-swap fixture plates.  Two bundled configurations are available that include 6x6” and 6x12” fixture plates, a specially designed removable qualifying ball plate, and a versatile angle plate.  Also included is a work holding kit versatile enough to hold most any part.

    The Loc-N-Load™ fixture system enhances the easy “teach and repeat” mode that sets the zCAT apart.  Once programmed, the zCAT takes over ensuring precise, repeatable results as many times as necessary. By fixturing on quick-swap plates, inspectors can change parts in and out without building and breaking down setups.  Several unique parts can be setup or multiples of the same part fixtured and programs repeated. Affordable plates can be dedicated and kept with the job box for fast, repeatable setups.

    These two products offer similar benefits.  They are an affordable solution to companies just starting out with automated inspection or those wanting to complement existing CMMs. Both Inspection Arsenal™ and zCat help to break inspection bottlenecks with a short learning curve and by speeding inspections on the shop floor – inspections that can be conducted by anyone.  Inspection Arsenal™ also offers companies an opportunity to standardize across all CMMs with its full line of interlocking fixture plates and non-marring work holding.

    Phillips Precision, Inc. is a full service machine shop and manufacturer of unique work holding solutions. Fowler High Precision is a globally recognized, leading supplier of high-quality inspection, leveling, control and calibration equipment. Visit www.fixture-up.com to see the full Inspection Arsenal™ product line and www.fowlerprecision.com for complete zCAT product specifications.

     
       

 Products

  • Rapid-Loc™ Pneumatic Inspection Vise
    Rapid-Loc™ pneumatic vise for CMM inspection is designed to take advantage of the air at your CMM for part swaps in the flip of a switch!...

  • Phillips Precision’s Products Division introduces the Rapid-Loc™ pneumatic vise for CMM inspection.  Designed to take advantage of the air at your CMM, the soft jaws of the Rapid-Loc™ vise can be customized to hold most any part. Regulated air pressure can produce just enough clamping force to hold delicate parts or as much as 150-lbs if needed.   Mount Rapid-Loc™ vises on Inspection Arsenal™ Loc-N-Load™ quick-swap fixture plates for fast, accurate, and highly repeatable setups that help break inspection bottlenecks.   Rapid-Loc™ can also be mounted on existing CMM breadboards.

    The black anodized, aluminum Rapid-Loc™ pneumatic vise is currently available with a 2.5”x 3.5” footprint, .06” travel, 150-lbs of force and comes with 1 set of machineable aluminum soft jaws and fully assembled with valves, fittings, and tubing.  Pre-packaged sets of fittings are easy to add for multi-vise setups.  Secure Rapid-Loc™ with standard ¼-20 or M6 thread screws.  Simply flip a switch to swap parts!

  • Metric Loc-N-Load™ Quick-Swap Fixture System
    Metric docking rails are available in three lengths and plates in 4 sizes with 2 accessory plates. Order individually or in bundled sets which includes work holding....

  •  

    Phillips Precision Products Division, Boylston, MA - Now, the technique altering, quick-swap concept of Inspection Arsenal™ Loc-N-Load™ plates will be available in metric. Launching initially in Europe, the metric system can now help make fundamental inspection improvements worldwide. Whether a small job shop or a large manufacturer, Loc-N-Load™ breaks inspection bottlenecks saving companies tens of thousands of dollars in faster inspections.

    Metric plates are available in 3 length docking rails of 360mm, 540mm, or 720mm. Rails easily install on any size CMM.  Four interlocking plates that are 180x180mm, 180x360mm, 360x360mm, and 360x540mm can be purchased individually or in pre-configured bundled sets which include a 48 piece work holding kit.  Accessory plates available are an angle plate which acts as a stop and provides access to the granite and a unique qualifying ball/bar plate which lets you qualify the probe and move the ball/bar out of the way!

    Inspection Arsenal™ complements other fixturing AND the value makes converting from other plates very cost effective


 Additional Info

Which Industrial supply chains does your company serve? (up to 5)
Automotive, Defense, Energy, Medical