For fluid(s) up to a viscosity of max. 100 mm²/s at 20 °C (except for substances containing paint, resin and glue), Do you have a need, then our self-priming systems of the TCJ series are just the right thing for you.
The advantage of the TCJ system is that it reduces and prevents dirt ingress into your process.
Both the 10-liter and 25-liter system both are adapted to commercially available fluid containers. This allows the container to be directly changed – without cumbersome refilling. The result is no dirt in the container and thus a process that continues to function optimally.
System available for up to six spray heads..
NEW! Impresses not only with its well-conceived components and size but also with its innovative form.
This system has combined HPM’s decades of experience in an attractive design. The independent regulation of fluid and spray air pressure achieves excellent results even with higher-viscosity media.
The PPJ system can be used with our spray heads (starting on p. 20) and the JOP drip-feed dosing device (p. 30) up to a maximum viscosity of 2300 mm²/s at 20 °C or 500 mm²/s at 40 °C (except for substances containing paint, resin and glue).
The advantage of our MDJ systems is that they are independent of viscosity. In addition, the MDJ system is easier to use due to the separate regulation of the air and fluid pressure.
Suitable for all fluids that reach a maximum viscosity of 2300 mm²/s at 20 °C or 500 mm²/s at 40 °C (except for substances containing paint, resin and glue). Module for wall installation consisting of a stainless-steel pressure tank with 10 or 15 liters, fluid filter (100…120), as well as one or more valve modules and a service unit.
Due to the possibility of regulating the fluid pressure independently of the spray pressure, our MDJ system is also very well suited for larger transfer, profiling or automation systems with a large number of spraying points. We will be happy to plan a special system just for you, simply contact us.
Mobile minimum quality lubrication system for controlled and fine film application of fluids in the low-pressure range according to the injector principle.
This unit is connected to the customer’s compressed air line via a quick coupler and fastened with the magnetic base at the desired place of installation. The spray head is positioned via the accompanying bracket. A spray jet with a full cone of approximately 15° is created with little overspray at the spray head by switching the solenoid valve on and off.
Suitable for all fluids with a maximum viscosity of 100 mm²/s at 20 °C and 35 mm²/s at 40 °C (except for substances containing paint, resin and glue).
Our ProfiKompakt is also available with our precision drip-feed dosing device.
Breeze technology offer tremendous advantages over the previous classic lubrication applications. HPM Breeze can be used on portal milling machines, turning and milling centers, multi-lobe turning centers, multi-spindle machines and all other machining centers.
On average, between 5 and 50 ml of lubricant per process hour and tool are used for the machining process. Depending on the requirement of the individual operation (up to 200 ml per process hour) the consumption values can be adjusted for a short time.
HPM BREEZE IS…
- Only an axial spindle rotary feedthrough or similar is required. No change in the spindle is required by our 1 – channel technology.
- Response times <0.1 s
- Can be used between 4-16 bar (depending on tool)
- Air volume flow from 70-800 NI/min (depending on tool)
- Consumption between 5-100 ml/h
- Several spindles can be supplied at the same time
- The spindle should be suitable for dry running
OPTIONAL SWITCHING BETWEEN KSS/MMS
- Various pressures, controllable via NC machine program
- Oil saturation is additionally adjustable via injectors
- Capacity is approximately 4 liters
NO SUCH THING AS IMPOSSIBLE..
We approach all our tasks according to this motto. As the result of our modular system, we can find optimum solution for your process working together with.
As you see, there are no limits to your requirements. Take advantage of our decades of experience in planning special systems. Simply contact us. Together, we will find the best solution for you.
Some of our offering include but are not limited too: Spray bars and automatic filling