TESEO SRL  

The key innovation of this system lies in its adaptability in adding, moving or expanding distributions systems for compressed air, gas and other pressurized fluids. This flexible system makes for quick system changes with minimal associated downtime.
The system includes a hollow bar that integrates a high strength rectangular outer profile with a high flow, low resistance
round inner profile and creates the perfect balance between adaptability, durabity & performance. The external rectangular section incorporates tee slots that allow for easy slip-on assembly of fittings, valves and support brackets. This fast and easy method of installation results in a total system costs that compares favorably with any other piping system on the market.
TESEO’s wide selection of fittings and outlet plates allow for an almost infinite array of possible piping system configurations. This coupled with its virtually leak-proof double O’ring sealing method provides the most flexible, durable and energy-efficient piping system available.

TESEO HBS Advantages:
• Fast installation.
• Quick positioning of additional outlets.
• Easy changes and new branches
• Clean and smooth inner and outer surfaces.
• Integrated modular system.

This patented piping system is the result of years of research and our extensive installation experience encompassing literally thousands of aluminum distribution systems all over the world.
The AP system is suitable for compressed air main lines (headers), branch distribution lines or for point of use air drops.

TESEO AP Advantages:
• Fast & Easy to assemble: no special tools or skills are required
• Its simple profile is symmetric and can be used in any orientation.
• Available with a wide range of accessories which are composed of simple modular elements compatible both with the present HBS system and steel pipes with “Gas” BSP or NPT threads.
• Simpler, easy to work with profile means that AP is more convenient than a traditional piping system.

This patented AP system is suitable for non-hazardous gases and fluids.

By simply doubling up the clamping brackets on every joint and terminal connection of the system, the product can be used at a working pressure up to 360 psi.

The increase in the working pressure permits the transport and distribution of incompressible fluids, such as mineral or synthetic oils, and cooling or lubricating fluids.

For such applications a series of dedicated accessories is available, such as safety relief valves, gauges and expansion tanks. 

Kiwa has determined that the quality management system of Teseo Srl meets the requirements of Annex III, E1 of the Pressure Equipment Directive 2014/68/UE. KIWA Certificate n°: R09351RM-01. Marking CE0476.

NOTICE: For proper selection and application please contact TESEO or your local representative.

AM is a revolutionary manifold for the distribution of compressed air and other fluids under pressure (drinking water, oil, inert gases and vacuum ).

AM is particularly well-suited for use on automatic machines requiring an air supply for pneumatic valves, actuators and other servomechanisms or to supply injection or die-casting presses to cool molds.

AM is assembled with TESEO’s HBS and AP components and piping. Teseo design and assemble the finished product ready to mount on the machine.

BENEFITS AND ADVANTAGES
• Rugged
• Lightweight
• No rust or corrosion
• Attractive, modern design
• Easy to fix to machine structures and frames
• Extends filter and pneumatic device lifetimes

TECHNICAL DATA
MAXIMUM WORKING PRESSURE:
• 220 psi with standard AP and HBS components
• 360 psi (with AP Multifluid - double clamp)
RANGE OF DIAMETERS (full inner bore in mm)
20, 25, 32, 40, 50, 63, 80, 110
WORKING TEMPERATURE RANGE
-4/+248°F

! For chemical compatibility and further details contact TESEO or you local representative.

! The technical office of Teseo srl design bespoke manifolds at the request of the customer and supply them already assembly. Providing the technical and usage data is necessary for the development of the offer.

CUSTOMIZABILE TROLLEY

The trolley for the automotive industry, is a customizable trolley which runs on our modular pipeline.

The tubing serves as both a rail that as a conduit of compressed air.

The trolley is able to support and feed one or more tools along the lane of the pipe.

A typical engagement is on automobile assembly lines.

The Swinging Arm Bracket provides both the compressed air feed and the support mechanism for the pneumatic tool. It consists of a horizontal bar fixed on a hollow pin that rotates on selflubricating bearings and is equipped with gaskets for the compressed air seal.

The pin is supported by two brackets attached to the wall with expansion dowels.

For extra movement along the length of the SAB, an ATS system can be attached.

! The technical office of TESEO Srl develops swinging arms at customer’s request and supplies them already assembled. Providing the technical and usage data is necessary for the development of the offer.

This unique track and trolley system has been designed to support air and electric tools and to provide compressed air, fluids and electrical power to any point along the track.

ATS is manufactured from a modular extruded aluminum track which can be secured to a wall or any suitable structure. The trolley runs along the track with only minimal effort and provides ready movement of air and electric tools to the point of use.

Additional options can be supplied on the trolley. Please contact TESEO or your local representative for complete details.

TESEO ATS Benefits:
• Eliminates trailing hoses that can impair operator movement.
• Trolley allows total flexibility of use anywhere along the track
• Supported tools reduce operator fatigue and improve productivity.

Technical specifications
• Extruded anodized aluminum rail.
• Trolley runs on roller bearings.
• Supply tube: 1/4”.
• Operating pressure: 117 psi.
• Electric current: 220V single phase..
• Approximate load on trolley: 66 lbs.
• Cable: 3G-2,5 in.² C/47

! The technical office of TESEO Srl develops sliding trolleys, on a pressurized and electrified rail, upon customer request and supplies them already assembled. Providing the technical and usage data is necessary for the development of the offer.

This simple trolley system includes 6 ball bearing wheels running on our HBS50 profile.

The hollow bar has a double function: track for the trolley and conduit for compressed air.

This trolley is recommended for high flow and heavy loads (max 88 lbs).

Typical application at automotive assembly plant.

! Maximum static load applied to the hook 66 lbs (Tmin -4°F Tmax +176°F)

! The technical office of TESEO Srl develops sliding trolleys on hollow bar at customer’s request and supplies them already assembled. Providing the technical and usage data is necessary for the development of the offer.

The WBA is specially equipped for assembly work that utilizes pneumatic tools. It is constructed from a rugged extruded aluminum frame which supports the ATS system.

The ATS system consists of a rail on which a trolley runs freely from one end of the bench to the other. The trolley is equipped with an air outlet and a spring catch.

One of the two upright supports of the bench frame is pressurized and acts as both an air reservoir and the delivery system.
To complete the system we supply height adjustable feet and cross bars with shelves to which parts bins can be hooked. The whole frame is supplied, partially assembled, in a rigid cardboard box.

The supply of the simple bench frame represents a solid alternative to the complete bench. It must be fixed to a customer’s existing workbench by means of proper feed lines.

Technical Characteristics:
• Anodized aluminum frame
• Table dimensions: 2.5’x5’ or 6.5’
• Height from ground: 2.8’-3.1’
• Height of trolley from ground: 7.2’
• Compressed air outlet: 1/4”
• Compressed air inlet: 3/8”

! The technical office of TESEO Srl develops assembly workbenches at customer’s request and supplies them already assembled. Providing the technical and usage data is necessary for the development of the offer.

THE INNOVATIVE WIND COMPRESSOR
SPIN YOUR ENERGY
With the revolutionary wind propelled air compressor ALYSEO

Teseo is committed to saving the energy required for compressed air generation. Like electricity, compressed air is a fluid for energy transport, but more expensive – 10 times more expensive. Any factory or industry will be able to compensate compressed air losses in the production with the wind propelled compressor ALYSEO, without any electrical power supply.

Innovative
This innovative machine offers various advantages: it’s powered by a clean, free of charge renewable energy; it’s designed with a simple and economical technology; it’s not limited by wind direction; with the new wing profile air compression starts even with a light breeze. Energy is storable with air receivers under the form of compressed air; the entire structure is built in aluminum, 90% recyclable material. Find out more on www.alyseo.us