VaporFlame

San Diego,  CA 
United States
http://www.vaporflame.net
  • Booth: 1635

VaporFlame is a safe, realistic flame effect created by water and compressed air. VaporFlame are safe to the touch, and use an ultra-fine vapor which does not collect on surrounding gear. No heat or flammable materials are used. Flames are created with compressed air and atomized water. No other fluids or fuels.


 Products

  • VF6b
    SAFE FIRE! The VaporFlame VF6b is a flame effect accessory that attaches to an LED lighting fixture and uses compressed air and water to create a plume of vapor....

  • The VF6b is a flame effect that attaches to the standard 7.5-inch gel frame slot on an LED Leko or Par, fixture turning a standard light into a VaporFlame effect fixture.  Our most versatile fixture, the VF6b can create a range of effects from a low 5-inch flame to a 5-foot blaze and can be mounted at any angle. 

    No heat or flammable material makes the VaporFlame safe to use in close proximity to artists, gear, and scenic pieces.  

     

    The VF6b takes 2 channels of DMX, for individual control of the air and water output.  Adjustment dials allow the user to control the fullness of the flame from the unit, creating the most realistic fake flame available.  

     

    Connected to any potable water line and air supply, the VF6b consumes only 1/4th gallon of water per hour and 1 cfm of air. VaporFlame fixtures atomize their vapor plumes so as not to collect on gear or surfaces.

  • VF8b
    A REALLY BIG Safe Flame!
    The VaporFlame VF8 is a flame effect accessory that attaches to an LED lighting fixture and uses compressed air and water to create a plume of vapor....

  • The VF8 is a flame effect that to the standard 7.5-inch gel frame slot on an LED Leko or Par, turning a standard light into a VaporFlame effect fixture.  Our most impressive fixture, the VF8 can create a range of effects from a 10-inch fire to a 10-foot blast and can be mounted at any angle. 

     

    No heat or flammable material makes the VaporFlame safe to use in close proximity to artists, gear, and scenic pieces.  

    The VF8 takes 2 channels of DMX, for individual control of the air and water output.  Adjustment dials allow the user to control the fullness of the flame from the unit, creating the most realistic fake flame available.

     

    Connected to any potable water line and air supply, the VF8 consumes 1 gallon of water per hour and 9 cfm of air.