HPM Technologie GmbH  

OUR DEVICES FOR EXTERNAL LUBRICATION

Efficient in consumption.

Versatile in use. MQL IN PRACTICE - COSTS & ENVIRONMENT The main advantage of minimum quantity lubrication is the enormous reduction in the amount of lubricant used in comparison to conventional cooling lubrication systems and concepts. Unlike conventional flood lubrication or large-area application, minimal quantity lubrication only requires a few millilitres per hour for the respective process. In addition, the minimal fluid application reduces the impact on people and the environment and is easy on the wallet.

OUR DEVICES FOR INTERNAL LUBRICATION

ECONOMICAL AND ECOLOGICAL MACHINING WITH HPM BREEZE

Our Breeze technology has many enormous advantages over the previous classic lubrication applications. For the machining process, an average of between 5 and 50 ml of lubricant is used per process hour and tool. These consumption values can also be briefly — depending on the requirements of the individual operation — increased to up to 200 ml per process hour. In addition to this excellent advantage over the previous method, the HPM Breeze method offers further enormous advantages from an economic and ecological point of view.

ADVANTAGES OF HPM BREEZE Can be used on portal milling machines, turning and milling centers, multi-lobe turning centers, multi-spindle machines and all other machining centers.

HIGH PERFORMANCE INDUSTRIAL LUBRICANTS

Offering the best solution for your process has always been our motivation. Protecting the environment and people is our passion. With our state-of-the-art fluids from the SURVOS, SENTOS, SAMNOS and POWER series, we are optimally equipped for this goal.

We make the highest demands on our products. Our lubricants are ultrapure and fulfil all requirements for lubricity and evaporation time. In addition, our SURVOS Plus L and SENTOS V-LR3 high-performance lubricants meet the strict food law requirements of the FDA US regulations in acc. with 21 CFR 178.3620 (b) and 178.3120.

Lubricants from HPM Technologie are developed and produced according to the highest ecological standards. People and the environment are sustainably protected.

With products from the SAMNOS series, you will also find biological lubricants in our range.

UNIQUE ADVANTAGES OF OUR INDUSTRIAL LUBRICANTS

• Specially developed for MQL
• Elimination of cleaning processes
• Extremely high cutting speed without reduction in tool life
• Increase in material throughput
• Better product quality Clean parts / products
• Built-up edges are effectively prevented
• Optimal lubricity with residue-free drying 
• Can be used for almost all metals as well as plastics.

EFFICIENT, INDIVIDUAL, FLEXIBLE, PRECISE.

The spray heads are designed for controlled and fine film application of fluids in the low-pressure range using the injection principle. This means a very economical air consumption of approx. 2 - 5.5 l/min. at the same time.

All fluids can be sprayed that have a maximum viscosity of approx. 2.300 mm²/s at 20° or 500 mm²/s at 40° (except for substances containing paint, resin and glue).

The spray head is set to a medium value at the factory. The spray jet produces a nearly full cone of approx. 15°. Depending on the fluid structure of the processing media used, the opening angle of the spray cone can be larger or smaller. Ideally, the distance of the spray nozzle to workpiece/ tool to be sprayed should not be greater than 200 mm. An average spray cone of 15° covers an area of approx. Ø 50mm.

The output quantity with water is 0.04 litres to 4.2 litres per hour in continuous operation.