ESCO Tool Co  

75 October Hill Rd
Holliston,  MA  01746-1344

United States
  • Booth: C10548

ESCO Tool manufactures, sells and rents MILLHOG®, Hog Tie® and Flange Hog® tools for the fabrication and maintenance of tube and pipe systems.


-  Bevel the hardest tube and pipe alloys without cutting fluids at any angle.

-  Remove membrane, overlay and cladding from boiler tubes while beveling the   tube end.

-  Cut boiler tube panels quickly, accurately and with no “HAZ”.

-  Notch membrane from between boiler tubes without the risk of tube damage            due to deflection that can occur with flame notching.

-  Cut pipe to 60in O.D.

-  Expand boiler tubes using torque controlled rolling motors for precise tube wall   reduction and tight tube joints.

HOG TIE® Boiler Tube Alignment Clamp:

-  Accurately aligns boiler tube ends in preparation for welding.

-  Reduces the risk of tube joint failure due to misalignment.  

Flange Hog® Flange Facing Tool:

  • Reconditions RF and FF flange gasket seat surfaces with a precision phonographic finish. Fast set-up and manually operated.

PLEASE NOTE -- Supported browsers are: Internet Explorer - 10.0 and higher; Chrome - 55.0 and higher; Firefox - 50.0 and higher; Safari - 5.0 and higher. This program does not support compatibility view to run older browser software. Please make sure you are using the most up to date browser version to ensure complete use of the website.

For Technical Support with this webpage, please contact support.