Boschert Precision Machinery Inc  

PO Box 409
Butler,  WI  53007-0409

United States
  • Booth: B8107

See us in Booth B8107
Boschert USA represents German manufacturer Boschert GmbH and Boschert-Gizelis, Stierli-Bieger and PBT of Switzerland, AMB Picot of Lyon, France. All of our product lines are high quality European manufacturers with decades of experience building industry leading products that are constantly updated and expanded. Boschert USA has been distributing and supporting these products for nearly 50 years in North America. 
Boschert CU Profi with new productivity enhancing options. 
o Copper bar punching machine for bars up to ¾” x 8” x 20’
o Standard “thick turret” tooling with B and new “C” station
o Cut-off tool 60mm wide
o Marking and tapping options
o Automatic loading and unloading options
Boschert CS copper bar shear
o Precision shearing of copper bar up to 8” x ½”
o Backgauge with Digital Readouts
Stierli-Bieger 420 CNC WP horizontal bending machines with automatic spring-back compensation. 
o 45 tons of capacity for steel or copper bar bending
o Back gauges in 40, 80 and 120” lengths
Stierli  820 CNC horizontal beam and profile straightening machine.
o 90-ton capacity for bending and straightening large profiles
PBT 3-roll profile benders with automatic radius measuring and in-process correction. 
o Arkus12 for smaller profiles and tight bends
o PBT25 for large, complex bends
Available with “Z” axis and automatic measuring 
Boschert Gizelis 6-axis press brake with Automatic Thickness Measurement and wireless Angle Measurement System
o 155 ton capacity by 10’ bending length
• Boschert Gizelis 10' x 1/4" CNC Shear with sliding CNC
Picot CNC plate rolls with patented Easy Roll® software eliminating the need for experienced roll operators.
o 8’ x ¼” capacity in mild steel with fully automatic “first part is good” operation.


  • Picot RCS Plate Roll with EasyRoll
    Picot's revolutionary CNC plate rolls makes the need for experienced roll operators a thing of the past. Enter the material, sizes and required diameter and the first part out is near-perfect. Picot is at the BOSCHERT USA Booth, #B8107...

  • Picot's 3-roll CNC Plate Rolling Machines out-perform 4-roll machines every time. Shorter flat edges for pre-bending than 4-roll machines. No crushing or lamination of the work piece as with 4-roll machines. Maximum torque for cone bending because there is no pinch retraction as on 4-roll machines. Wide gap between the rolls allows bending of profiles.

PLEASE NOTE -- Supported browsers are: Internet Explorer - 10.0 and higher; Chrome - 55.0 and higher; Firefox - 50.0 and higher; Safari - 5.0 and higher. This program does not support compatibility view to run older browser software. Please make sure you are using the most up to date browser version to ensure complete use of the website.

For Technical Support with this webpage, please contact support.