Fusion Inc

4658 E 355th St
Willoughby,  OH  44094-4630

United States
  • Booth: C12012

 Press Releases

  • June 21, 2018                                           For Immediate Release

    Fusion to Display Brazing Machine

    at FABTECH

                Willoughby, Ohio.  Fusion will be displaying a machine for brazing and soldering at the FABTECH Show in Atlanta, November 6-8, 2018.  The Rotary Index 100 is designed for smaller assemblies since its footprint is only 36”W X 48”D. Rates are typically between 100 – 200 parts per hour, depending on assembly mass and configuration. Brass, copper, steel, stainless, and aluminum can all be joined on the machine.

    The production sequence begins with an operator who loads the assembly into a stainless steel fixture. A deposit of Fusion Paste Filler Metal is applied to the joint area with an automatic dispenser. The assemblies then index through two or three flame heat stations and an air and water cooling sequence before unloading.

    The Rotary Index 100 is equipped with clear, acrylic guarding on three sides. Utilities required are 120 VAC, natural gas or propane, 80 psi air, water, and drain. For more information, contact Tony Straniero, 440-602-5510. FABTECH Booth # C12012.

PLEASE NOTE -- Supported browsers are: Internet Explorer - 10.0 and higher; Chrome - 55.0 and higher; Firefox - 50.0 and higher; Safari - 5.0 and higher. This program does not support compatibility view to run older browser software. Please make sure you are using the most up to date browser version to ensure complete use of the website.

For Technical Support with this webpage, please contact support.