Hilma

927 HORAN DR
FENTON,  MO  63026

United States
636-386-8022
http://www.hilma-usa.com
  • Booth: A1633


 Products

  • Wedge Clamp with Patented Safety Feature
    New Hilma Wedge Clamp now offers patented safety feature added to the tapered clamping bolt. The notch will support the upper die in the event of a pressure loss. More information, roemheld-usa.com....

  • New Wedge Clamp Offers Patented Safety Feature

    Hilma has announced the expansion of their line of wedge clamps with a new version of the clamp featuring a patented safety notch added to the tapered clamping bolt. The notch will support the upper die in the event of a pressure loss.

    The wedge clamp consists of a hydraulic cylinder block and a bolt guided within the housing. As it clamps and the bolt advances, it mechanically locks the die in place with its 20 degree tapered clamp surface. In the unlikely case of  a pressure loss, this new safety feature in the bolt will engage with a mating notch  in the tapered clamping plate on the die set, securely holding the upper die. During unclamping, the extended bolt retracts fully into the housing for easy die removal.

    The wedge clamping elements, with single or dual action, exert  forces of 3 to 69 US tons, and have a maximum temperature rating of 570°F. The clamps can be actuated via hydraulic, electric or springs. Position sensors are available to verify the extended / clamped or retracted / unclamped positions.

    Wedge clamps come in a variety of styles allowing customers to configure clamping arrangements using a range of options from cooling circuits to sequence valve controls.

    For more information on quick die change and quick mold change equipment, contact Hilma, +1 (636) 386-8022, or view roemheld-usa.com.

PLEASE NOTE -- Supported browsers are: Internet Explorer - 10.0 and higher; Chrome - 55.0 and higher; Firefox - 50.0 and higher; Safari - 5.0 and higher. This program does not support compatibility view to run older browser software. Please make sure you are using the most up to date browser version to ensure complete use of the website.

For Technical Support with this webpage, please contact support.