The UltiMaker S7 Pro Bundle includes the all-new Ultimaker S7 & Ultimaker Material station. Providing users with:

-Integrated Air Manager

-Inductive Sensor Bed Leveling

-High-Definition On-Board Camera

-Material Station

And More!

Download the product data sheet here.

With inductive sensor-enabled bed leveling, the S7 ensures a perfect first layer for all of your prints while the integrated air manager maintains an optimally regulated temperature. ​The PEI-coated flexible build plate helps with improved adhesion to a wider range of materials. Users of the Ultimaker S7 can now print reliably with Ultimaker branded filaments without any glue required. The R&D team has rigorously tested this, and results showed better adhesion performance compared to the glass build plate, with the exception of large prints using Ultimaker PC, which can be properly addressed with the Magigoo PC adhesive. ​

The UltiMaker S7 Pro Bundle Provides users with: 

-​Easy Setup & Monitoring

​​Start printing quickly with a simple first-time user experience. Including NFC material recognition and a high-resolution internal camera.

-Environmental Control

​The integrated air manager filters out up to 95% of UFPs while also keeping the build chamber temperature carefully regulated.​

-Flexible Build Plate

​The PEI-coated build plate makes for reliable print adhesion and removal. A sensor also assures your build plate will always be in place before printing.​

-Advanced Active Leveling

​Reliable first-layer adhesion enables unattended use without manual leveling.

-Wide material choice

​​Use almost any material with our open filament system, including composites.​

-UltiMaker Essentials​

Access to security-assessed software – with remote printing, user management, and e-learning.

Learn More about the UltiMaker S7 Pro Bundle here:

https://www.3d-printer.com/ultimaker-s7-pro-bundle.html

The Intamsys Funmat Pro 310 is a cutting-edge industrial 3D printer.

Printing volume:

-Dual: 260x260x260mm

-Single: 305x260x260mm

Printing capability and nozzle design with IDEX dual nozzle system:

-Independent dual extruder (IDEX), for different printing modes as dual material printing, mirror printing, copy printing

-Modular design of the printhead, quick-change system for easy installation and replacement and convenient maintenance

-Dual-drive gear extruder, increase the contact surface for more torque and higher reliability

Thermal design for high strength and high accuracy

-The maximum temperature of the chamber is 100°C, the maximum heating temperature of the build plate is 160°C. It provides fast heating with its high-power output

-Excellent thermal design reduce thermal deformation of the mechanics and lower the shrinkage of models during printing, avoid warping and increase the interlayer-adhesion

-The maximum temperature of the nozzle is 300°C

-High-power nozzle heaters decrease the heating time and ensures that the nozzle is rapidly heated, and the filament is fully melted in the nozzle