Polymaker

Thanks to its chemical structure, this product has lower moisture sensitivity compared to PA6/66 and other PA6-based materials. PolyMide™ PA612-CF also has better mechanical properties than PA12-based materials. In addition, the carbon fiber reinforcement and Warp-Free™ technology enhance the size stability of the prints produced with this material.

Print Settings:

Printing Temperature: 250˚C - 300˚C
Bed Temperature: 25˚C - 50˚C
Printing Speed: 30mm/s - 60mm/s
Fan: OFF

Direct Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Indirect Drive:
Retraction Distance: 6mm
Retraction Speed: 60mm/s

Drying Settings: 100˚C for 8h
(Only if the material has absorbed moisture)

Annealing Settings: 80˚ for 6h

PolySupport™ for PA12 is a break away support for Polymaker PA12 based filaments, fully compatible with PolyMide™ PA12-CF and PolyMide™ PA612-CF. PolySupport™ interacts perfectly with long chain polyamide and is strong enough to support it. PolySupport™ is also easily removable by hand. It is safe and eco-friendly and can be directly treated as solid waste.

Print Settings:

Printing Temperature: 270-300˚C
Printing Speed: 30-60mm/s
Bed Temperature: 50-80˚C
Chamber Temperature: N/A
Fan: OFF
Drying Settings: 100˚C for 8h
Annealing: N/A

PolyTerra™️ PLA is a bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA, providing ease of use, printing quality, speed and reliability. PolyTerra™️ PLA is a newly developed material from Polymaker called FBC. It is a compound of PLA bioplastic and biocomposite. PLA is biodegradable under industrial composting conditions however the degradation rate is very slow in ambient temperatures. This specially designed biocomposite contains less plastic to degrade making PolyTerra™️ PLA a more environmental friendly material.

Print Settings:

Printing Temperature: 190˚C - 230˚C 
Bed Temperature: 25˚C - 60˚C
Printing Speed: 30mm/s - 70mm/s
Fan: ON

Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s

Drying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)

PolyLite™ PLA is a high-quality PLA designed for reliability and ease of printing. This temperature changing PLA changes color depending on the temperature. Polymaker’s new Color Changing series consists of two temperature-sensitive and one UV light-sensitive products. Models printed with the temperature-sensitive filaments will change color with changes in the surrounding temperature, while the UV light-sensitive filament emits a unique color when exposed to sunlight or UV light. This series of products can be used to manufacture components that change with temperature or UV light.

Print Settings:

Printing Temperature: 190˚C - 230˚C
Bed Temperature: 25˚C - 60˚C
Printing Speed: 40mm/s - 60mm/s
Fan: ON

Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s

Drying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)

PolyLite™ PLA is a high-quality PLA designed for reliability and ease of printing. This UV changing PLA changes color to Orange when under UV light or sunlight. Polymaker’s new Color Changing series consists of two temperature-sensitive and one UV light-sensitive products. Models printed with the temperature-sensitive filaments will change color with changes in the surrounding temperature, while the UV light-sensitive filament emits a unique color when exposed to sunlight or UV light. This series of products can be used to manufacture components that change with temperature or UV light.

Print Settings:

Printing Temperature: 190˚C - 230˚C
Bed Temperature: 25˚C - 60˚C
Printing Speed: 40mm/s - 60mm/s
Fan: ON

Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s

Drying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)