Intrepid Control Systems

TROY,  MI 
United States
http://www.intrepidcs.com
  • Booth: 1125

Intrepid Control Systems has been thriving for over 20 years, producing hardware and software tools for engineers in-vehicle, Autonomy, connectivity, Automotive Ethernet, and embedded engineering.  Widely recognized for its neoVI and ValueCAN series tools, Intrepid has also developed its RAD-Galaxy, RAD-Star 2, and RAD-Moon devices to interface with BroadR-Reach® / 100BASE-T1.  Intrepid supports the latest networks and protocols including AUTOSAR, CAN, CAN FD, LIN, FlexRay, Automotive Ethernet, Keyword, UART, J1939, ISO 14229, and GMLAN. Along with its network of distributors, Intrepid has offices in the USA, China, Japan, Germany, India, Korea, and Australia for direct sales and support.


 Products

  • RAD-Mars
    Autonomous SerDes Analyzer, Tap, Gateway, Vehicle Interface & Data Logger...

  • Applications - Log Everything!
    • ADAS Vehicle Gateway Module, with seven
    different networks
    • Time Aligned synchronous recording
    • Camera Benchmarking
    • Image Sensor Raw Pixel Recording and
    Analysis
    • Automated SerDes Frame Analysis, FPS,
    Frame Width, Height
    • Automated Raw to JPG image conversions
    • Real Time Data Recorder
    • Supports Virtual ECU Simulator Testing
    • Data Playback Analysis for CAN, Ethernet and
    Image data all on the same time base.
    • Export of CAN, Ethernet and Image data in
    various formats
    • Real time register manipulation and verification
    • Camera , Real Time Streaming and Translation
    • Camera Link Analysis and Optimization with
    advanced Virtual Cable tester eye diagram
    analysis
    • Camera to Controller SerDes Tapping
    • Camera Technology Converter to Ethernet or
    between FPD-Link III ↔ GMSL
    • Automotive Ethernet Media Converter
    2x100base-T1 to 2x1000BaseT ports

    Key Features

    • Ethernet Ports:
      • 1x 10GBASE-T
      • 2x 100/1000BASE-T or 10/100/1000
      • 2x 100BASE-T1
    • Up to 4x high-speed SerDes (FPD Link III or GMSL2)
    • USB 3 for data offload and configuration via USB-C connector
    • 2x USB 2 host for neoVI MIC2
    • Programmable membrane label with LEDs to show network and storage status
    • 8x ISO CAN FD channels 
    • 2x FlexRay receive-only channels
    • 8+TB of storage 
    • On-board UPS for safe shutdown on power loss
    • Low power: 36W(3.0A @ 12V)
    • Time synchronization with other Intrepid tools and autonomous logger systems (ICS Time Sync, PTP)
    • High-speed serial interface input and output supporting TI FPD-Link III or Maxim GMSL for direct camera or sensor connection, simulation, and tapping
    • Internal IMU and GPS chipsets with map reporting in VSPY
    • FPGA video frame compression/decimation


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


For all other inquiries, please contact show management.