Velo3D

511 Division St
Campbell,  CA  95008-6905

United States
408-610-3915
  • Booth: 1924

VELO3D frees technology leaders to manufacture anything with SupportFree for Metal capabilities. With the VELO3D Sapphire production printer and Flow print preparation software, engineers have the means to change the industry and accelerate metal 3D printing. Our company is focused on driving adoption of the ability to print impossible parts, opening the way for new, higher performing solutions.

SupportFree: VELO3D separates itself from existing powder bed fusion solutions with its unique ability to print low angles and overhangs below 10 degrees, as well as large diameters and inner tubes up to 40mm without the need for supports. This not only eliminates the need for post-processing, but it overcomes the “45 degree rule” – a boundary requiring supports at angles less than 45 degrees. VELO3D frees designers to build the impossible – unlocking a wealth of designs that can be produced with additive technology.

Sapphire Metal 3D Printer: Sapphire™ printers help engineers to realize the vision of metal 3D printing. Through our unique SupportFree additive manufacturing capabilities, engineers have the ability to unlock new designs, boost part performance, and lower part cost.

Flow Print Preparation Software: Flow™ ensures predictable print outcomes while significantly reducing print preparation time. Driven by a powerful, integrated simulation engine and co-developed with Sapphire, Flow unlocks parts not previously possible with Additive Manufacturing (AM).


 Products

  • Sapphire Metal 3D Printer
    Sapphire™ printers help engineers to realize the vision of metal 3D printing. Through our unique SupportFree additive manufacturing capabilities, engineers have the ability to unlock new designs, boost part performance, and lower part cost....

  • Sapphire™ printers help engineers to realize the vision of metal 3D printing. Through our unique SupportFree additive manufacturing capabilities, engineers have the ability to unlock new designs, boost part performance, and lower part cost.

    The VELO3D Sapphire system is designed from the ground up with high volume manufacturing in mind. It comprises a 315 mm diameter by 400 mm height build envelope, with high throughput dual kW laser operation. To deliver superior part-to-part consistency, integrated in-situ process metrology enables first-of-a-kind closed loop melt pool control.

PLEASE NOTE -- Supported browsers are: Internet Explorer - 10.0 and higher; Chrome - 55.0 and higher; Firefox - 50.0 and higher; Safari - 5.0 and higher. This program does not support compatibility view to run older browser software. Please make sure you are using the most up-to-date browser version to ensure complete use of the website.

For Technical Support with this webpage, please contact support.