The NCC-P38 50 degree water cooled gun, part #36800, is a rugged all purpose, water cooled, manual MIG welding torch designed to operate at welding currents up to 600 amps in CO2 and 500 amperes continuous duty using argon as the shielding gas. The NCC-P38 is intended for use with all manufacturers wire feeders which have provision for water cooling and will handle all types of welding wires in sizes from .035"-1/16" Steel, 3/64”-3/32” Aluminum. It accommodates a slip-in tip fastened by a collet action nut. A unique feature of this Water-Cooled Curved Gun is that the nozzle assembly water chamber and inner body water chamber are serially connected to each other with sliding removable connectors making it a relatively simple matter to detach the nozzle assembly, thus completely eliminating the need for gaskets in the water passage system. The 50-degree, curved metallic water-cooled front body allows for operation in tight, hard-to-reach areas. The torch has a copper gas nozzle, which threads into the copper front end of the torch for better heat dissipation. The slip-in contact tip is threadless and is retained by a collet action nut for easy removal and insertion of a new tip . All utilities are connected internally to the torch body and exit from the rear of the torch body housing. We also offer an optional cable/hose sheath for better cable management. The torch is provided with a button switch which can be positioned at any point on the torch handle. For feeding all wires, a replaceable liner conduit system is available for feeding 0.35, .045, .047, .052, and 1/16-in. hard/cored wires through a continuous metal liner run to the tip in the gun with no gaps. For aluminum welding of 3/64, 1/16 and 3/32-in. wires run through a continuous Nylatron liner run to the tip in the gun with no gaps. These D/F Machine Specialties Water-Cooled Curved Guns are designed to be run at 100% duty cycles, upwards of 650 amps.
For Technical Support with this webpage, please contact support.
Products