Heavth USA

Building 01A, Liandong U Valley, Zhonglou
Changzhou,  Jiangsu  213012

China
+1 (949) 731-8208
http://www.heavth.com
  • Booth: W4270

 Products

  • 3 in 1 Handheld Air Cooled Laser Welding Machine
    FAST: Up to 4X faster than TIG VERSATILE: Wide range of materials EASY: Optimized presets reduce learning curve PORTABLE: Only 22KGS...

    • Product information
    Unbeatable Benefits
    ●FAST: Up to 4X faster than TIG ●VERSATILE: Wide range of materials – 2 mm ●EASY: Optimized presets reduce learning curve ●CONSISTENT: High-quality, repeatable results ●FLEXIBLE: Simple and challenging applications ●PRODUCTIVE: Pre- and post-weld cleaning capability
    ●PORTABLE: Only 22KGS
    Product Details
    Technical Parameters
    Model
    A70i
    A150i
    A200i
    Laser Source
    700W
    1500W
    2000W
    Shielding Gas
    Argon, Nitrogen, Air
    Argon, Nitrogen, Air
    Argon, Nitrogen, Air
    Complete penetration
    2mm
    4mm
    6mm
    Input Power
    <2.2KW
    <4.5KW
    <6KW
    Cooling Mode
    Air cooling
    Air cooling
    Air cooling
    Mains Supply
    AC220V 1PH
    AC220V 1PH
    AC220V 1PH
    Weight
    22KGS
    38KGS
    45KGS
    LightWELD - Turnkey Handheld Laser Welding & Cleaning Systems
    ● Adjustable laser welding power up to 1500 W
    ●Preset & user-defined modes optimize material-thickness combinations
    ●Wobble welding controls for 5 mm of additional weld width
    ● Rear panel provides intuitive connections for power, process gas and external accessory controls
    ● Cleaning power up to 2500 W peak for greater welding quality and finishing capability
    Less Heat & Distortion for More Productivity & Flexibility
    TIG welding is a time-consuming, two-handed welding method that requires an experienced, highly-skilled operator. TIG welding may
    generate extreme heat that deforms thin materials, produces poor visual finishes, is difficult when welding copper, and limited when welding metals of dissimilar thicknesses.
    MIG welding requires consumable wire, material pre-cleaning and beveled joints for thick metals for full penetration. Travel and work angles are limited and vertical positions are extremely challenging.
    LightWELD enables dramatically faster welding, is easier to learn and operate, and provides higher-quality, consistent results across a wider range of materials and thicknesses than MIG or TIG with minimal
    distortion, deformation, undercut or burn-through.
    Factory Presets Ensure Optimized Welds & Cleaning
    ●Simple preset selection ensures consistent high-quality laser welds and cleaning
    ●Presets include wobble welding function to accommodate wider seams and for parts with poor fit-up
    ●Operators can instantly switch between presets to process multiple material-thickness combinations
    ●Advanced operators can customize presets, save for future use and can be used by novice operators to produce the same results
    LightWELD is Fast & Easy to Set Up
    ●Ergonomic, compact and proven to be the most comfortable and easy to use laser gun with built-in wobble welding functionality.
    ●2-step trigger and part contact sensor enhance operator safety
    ●Purpose-built nozzle tips for various weld joint types and pre and post weld cleaning applications
    ●A single cable from the unit delivers laser power, gas and control connections to the gun
    Fast and Easy Setup
    ●Clearly labeled rear connections make getting started fast and easy
    ●Simply plug in power cord and gas connection, attach clamp to work surface, and the system is ready to go.
    ●Laser power, gas, and gun control are delivered through a single cable.
    ●An ethernet computer connection provides access to advanced parameter settings to fine tune and save process parameters.
    Optional Wire Feeding Package
    ● Wire welding capability extends laser welding applications to poorly fit-up parts
    ●Used for low carbon steel, stainless steel, aluminum and non-ferrous metals and alloys
    ●Wire feed speed range 40 – 600 cm/min (15 - 230 ipm)
    ●Wire diameter capacity 0.8 to 1.6 mm ( 0.035''- 0.063'')
    ●Wire feed tips: 0.8mm, 0.9mm, 1.2mm, 1.6mm
    Handheld Laser Welding & Cleaning Systems
    Easy to Learn
    Built-in factory presets for welding and cleaning reduce learning curves, new welders can be trained within hour and experienced welders realize an immediate increase to productivity
    Highly Productive
    High-speed welding that is 4X faster than TIG, with simple material preparation and minimal post-finishing, plus wobble welding and wire feed options for consistent high-quality results
    Highly Capable
    Easily weld and clean thick, thin and reflective metals with low heat input from < .040" (1.0mm) up to 1/4" (6.35mm) with minimal part distortion, improved visual appearance and increased overall part quality     

Categories

Finishing
  • Cleaning & Degreasing Equipment
    • Lasers
  • Laser Cutting Machines - Solid State
  • Lasers - Tube & Profile Welding
    • Robotics
  • Robotic Equipment - Welding (Laser)
    • Welding Machines/Equipment
  • Welding - Laser Beam Machines & Components
    • Loading ...

    :
    :


    Legend
    Available Timeslot
    Scheduled Appointment
    Personal Appointments
    Appointment Request
    Blocked Timeslot
    Restricted Timeslot
    Cancelled
    Declined

    PLEASE NOTE -- Supported browsers are: Internet Explorer - 10.0 and higher; Chrome - 55.0 and higher; Firefox - 50.0 and higher; Safari - 5.0 and higher. This program does not support compatibility view to run older browser software. Please make sure you are using the most up to date browser version to ensure complete use of the website.

    For technical support with this webpage, please contact support.

    Coming Soon