Bossi srl

Via Dante 63
Abbiategrasso,  MI  20081

Italy
39-029-4964141
www.bossi-srl.com
  • Booth: B5841


 Press Releases

  • Working area + belt unitVisit Formtek at booth B5841.  Formtek, Inc. is pleased to unveil the Bossi F1 series of machines that provide surface finishing or centerless grinding on round hollow or bar products made from ferrous (carbon and stainless steel) and non-ferrous materials (aluminum, brass, etc.).  Products such as pistons or cylinder rods are commons for these finishing products. 

    Based on the difference between incoming and desired surface finish, these machines can be configured with multiple working heads each finishing the surface a certain amount.  Typically, these machines are configured with a head count that yields the desired finish with one complete pass or cycle of the product through each head. 

    Depending on the recommended design style, these machines can be designed with tube/bar loading and unloading systems.  Loading systems begin with bundles that pick one tube/bar at a time to load into the machine and then tubes can be re-bundled after passing through the working heads.

    General view3Systems are configured with controls systems (typically Siemens PLC based).  Each head is independently controlled with both belt speed, pressure and motor load.  Product transfer speed (or pass through speed) is also controlled.  When changing diameters, the machines can be designed with both manual or automatic capabilities (meeting budget requirements of our customers).

    Mirror surfaces can be achieved with these systems using special “mop” heads coupled with polishing compounds.  All three (3) design types offer quick belt change and alignment systems as shown in the pictures below:

    For more information, please contact us at https://formtekgroup.com/contact-us  or direct at (216) 292-6300.

    Formtek is a group of long-established companies, each with a well-known name and a history of providing innovative, reliable equipment to the metal forming and metal processing industries. As a single source provider, Formtek continues to supply its customers with the highest quality equipment, parts and service available in the industries it serves.

    Visit the Formtek website (www.formtekgroup.com) for additional information on products and services.

    Working area + belt unitVisit Formtek at booth B5841.  Formtek, Inc. is please to unveil the Bossi F1 series of machines that provide surface finishing or centerless grinding on round hollow or bar products made from ferrous (carbon and stainless steel) and non-ferrous materials (aluminum, brass, etc.).  Products such as pistons or cylinder rods are commons for these finishing products. 

    Based on the difference between incoming and desired surface finish, these machines can be configured with multiple working heads each finishing the surface a certain amount.  Typically, these machines are configured with a head count that yields the desired finish with one complete pass or cycle of the product through each head. 

    Depending on the recommended design style, these machines can be designed with tube/bar loading and unloading systems.  Loading systems begin with bundles that pick one tube/bar at a time to load into the machine and then tubes can be re-bundled after passing through the working heads.

    General view3Systems are configured with controls systems (typically Siemens PLC based).  Each head is independently controlled with both belt speed, pressure and motor load.  Product transfer speed (or pass through speed) is also controlled.  When changing diameters, the machines can be designed with both manual or automatic capabilities (meeting budget requirements of our customers).

    Mirror surfaces can be achieved with these systems using special “mop” heads coupled with polishing compounds.  All three (3) design types offer quick belt change and alignment systems as shown in the pictures below:

    For more information, please contact us at https://formtekgroup.com/contact-us  or direct at (216) 292-6300.

    Formtek is a group of long-established companies, each with a well-known name and a history of providing innovative, reliable equipment to the metal forming and metal processing industries. As a single source provider, Formtek continues to supply its customers with the highest quality equipment, parts and service available in the industries it serves.

    Visit the Formtek website (www.formtekgroup.com) for additional information on products and services.

    Working area + belt unitVisit Formtek at booth B5841.  Formtek, Inc. is please to unveil the Bossi F1 series of machines that provide surface finishing or centerless grinding on round hollow or bar products made from ferrous (carbon and stainless steel) and non-ferrous materials (aluminum, brass, etc.).  Products such as pistons or cylinder rods are commons for these finishing products. 

    Based on the difference between incoming and desired surface finish, these machines can be configured with multiple working heads each finishing the surface a certain amount.  Typically, these machines are configured with a head count that yields the desired finish with one complete pass or cycle of the product through each head. 

    Depending on the recommended design style, these machines can be designed with tube/bar loading and unloading systems.  Loading systems begin with bundles that pick one tube/bar at a time to load into the machine and then tubes can be re-bundled after passing through the working heads.

    General view3Systems are configured with controls systems (typically Siemens PLC based).  Each head is independently controlled with both belt speed, pressure and motor load.  Product transfer speed (or pass through speed) is also controlled.  When changing diameters, the machines can be designed with both manual or automatic capabilities (meeting budget requirements of our customers).

    Mirror surfaces can be achieved with these systems using special “mop” heads coupled with polishing compounds.  All three (3) design types offer quick belt change and alignment systems as shown in the pictures below:

    For more information, please contact us at https://formtekgroup.com/contact-us  or direct at (216) 292-6300.

    Formtek is a group of long-established companies, each with a well-known name and a history of providing innovative, reliable equipment to the metal forming and metal processing industries. As a single source provider, Formtek continues to supply its customers with the highest quality equipment, parts and service available in the industries it serves.

    Visit the Formtek website (www.formtekgroup.com) for additional information on products and services.


 Products

  • Offline Surface Finishing for Round Products
    Bossi F1 series of machines provide surface finishing or centerless grinding on round hollow or bar products made from ferrous and non-ferrous materials Products such as pistons or cylinder rods are commons for these finishing products....
     

  • Based on the difference between incoming and desired surface finish, these machines can be configured with multiple working heads each finishing the surface a certain amount.  Typically, these machines are configured with a head count that yields the desired finish with one complete pass or cycle of the product through each head. 

    Depending on the recommended design style, these machines can be designed with tube/bar loading and unloading systems.  Loading systems begin with bundles that pick one tube/bar at a time to load into the machine and then tubes can be re-bundled after passing through the working heads.

    Systems are configured with controls systems (typically Siemens PLC based).  Each head is independently controlled with both belt speed, pressure and motor load.  Product transfer speed (or pass through speed) is also controlled.  When changing diameters, the machines can be designed with both manual or automatic capabilities (meeting budget requirements of our customers).

PLEASE NOTE -- Supported browsers are: Internet Explorer - 10.0 and higher; Chrome - 55.0 and higher; Firefox - 50.0 and higher; Safari - 5.0 and higher. This program does not support compatibility view to run older browser software. Please make sure you are using the most up to date browser version to ensure complete use of the website.

For Technical Support with this webpage, please contact support.