Cuttermasters

2353 Ridgecrest Place
Ottawa,  ON  K1H 7V4

Canada
613-523-7753
http://www.cuttermasters.com
  • Booth: 984

Cuttermasters is a machine tool engineering company specializing in Tool and cutter grinding solutions.

Cuttermasters has offices in Canada and the U.S.

End Mill and Drill Point Grinders: Flutes, Ends, Radii, Reduced Necks, Tool Cut Off, Weldon Flats

Machines that Grind Taps, Countersinks, Annular Cutters, Reamers, and more.

Cuttermasters is a licensed producer of the Cuttermaster Professional Tool Grinder and the inventor of and sole producer of the Tradesman DC grinder line.


 Press Releases

  • CUTTERMASTER CM-01DC End Mill End, Flute and Corner Radius Grinder.

    Traditionally, if you had a CUTTERMASTER CM-01 End Mill Grinder or similar, you had to break your end grinding set up, and install the Radius Attachment, to produce the corner radius on the tool.

    Today the Radius Attachment has been incorporated into the Air Bearing so that ends, flutes and corner rads can be ground without unchucking the tool and breaking your set up.

    With the addition of our Keep-it-Cool DC Motor and Control, the good old CUTTERMASTER CM-01 is The CUTTERMASTER CM-01 DCR (DC Variable Speed End Mill Grinder: Ends, Flutes and Rads)


 Products

  • CUTTERMASTER Professional CM-01P
    End Mill / Tool Grinder. Patented Torque Compensating Twin Spindle DC Drive makes for fast set up and eliminates tool burning. Easily grind ends and flutes of end mills as well as countersinks, reamers, annular cutters and side and face cutters....

    • Toycen Infinite Twin Motor Head
    • Cut off, Grind Weldon Set Screw Flats
    • Grind Flutes, Ends Rads, Reduced Necks,
    • Designed to keep the Machine tables free from grinding sparks and dust
    • Sharpen Reamers and Countersinks
    • Perfect flutes up to 2 inches, Fast ends
    • Ball Nose, Bull Nose with one single spindle the Toycen Radius Air (patented)
    • Grind Inside Flutes (Hoggers and Large Taps)
    • Infinitely Variable DC Whisper Drive with Torque Compensation
    • And you can hear yourself think (or that .010 Radius your grinding)

    Patented Torque Compensating Twin Spindle DC Drive makes for fast set up and eliminates tool burning. Easily grind ends and flutes of end mills as well as countersinks, reamers, annular cutters and side and face cutters. The Toycen Radius Air Spindle is a combination linear air bearing/indexer for straight and taper flutes and radius spindle for generating accurate bull and ball nose.

  • Tradesman Machinist
    The Tradesman Machinist is compatible with our wide range of attachments to simplify common machine shop necessities such as neck reduction, set screw flats and carbide cut off....

  • The Tradesman Machinist is a tool modification workstation. Grind set screw flats, neck / shank reductions, carbide tool cut off, corner radiuses, countersinks, reemers...

    Our Superabrasive wheels are balanced and always flat, so no extra grinding dust. When you use our grinder with it’s DC motor you find you can grind heavy cuts at below 1000 rpm keeping the process cool and quiet. If you want to put a .005 radius/chamfer on something, you can hear when the tool contacts the wheel.

    With the Tradesman DC Grinder you can grind carbide tools or Teflon on the same wheel because at 500 RPM, with no run out, there’s nothing threatening about it.

  • Tradesman Tower
    Ultimate fab shop deburring set up....

  • The Tradesman DC Tower is easy to mount,
    is reversible, variable speed and produces
    ten times the torque of the standard 1/3 hp
    motor (5 Foot Poinds @ 1000 rpm). This
    eliminates tool burning by facilitating heavy
    cuts at greatly reduced rpm, cutting grinding
    times in half on some tools.
    The Tradesman DC Tower is an infinitely
    variable and powerful variable speed wheel
    head with the Toycen DC control Drive
    System.