G550T has a high dynamic range up to a axis speed of 80 m/min and an acceleration of 7 m/s².
Turning technology has been integrated by GROB into the existing standalone machining centers as a continuous development of the milling technology. The milling-turning capability is achieved by a rotary table than can rotate.
Therefore, complete machining by milling and turning in one clamping is possible. This means less time required and higher accuracy due to the omission of set up times. Investment costs and space requirement in the production area can be reduced due to the combination of the two technologies. The unit costs are therefore also reduced.
Machine is equipped with a Siemens 840D sl control