Digital Metal AB

C/O Hoganas AB Bruksgatan 35
Hoganas,  Skane  263 83

Sweden
+46 423 -38000
https://digitalmetal.tech/
  • Booth: 641

Digital Metal

Based on its proprietary, high-precision binder-jetting technology, Digital Metal® develops, manufactures and sells 3D metal printers for additive manufacturing. Digital Metal also provides printing services. The focus is on small, complex components with high resolution and excellent surface finish. The DM P2500  is the first metal binder jetting system to receive UL certification.

The Digital Metal technology allows for printing without support structures, delivering a resolution of 35 µm and an average surface roughness of Ra 6 that is excellent for internal channels, among other benefits. Thanks to high printing productivity and accuracy, Digital Metal is ideal for both serial production and customised components. With more than 30 different geometries in serial production, it is a well proven system.

Digital Metal is part of Höganäs Group – the world’s leading producer of metal powders, including an extensive range of metal powders for additive manufacturing. Read more at https://digitalmetal.tech/


 Products

  • DM P2500, high precision metal binder jetting
    The DM P2500 is based upon Digital Metal proprietary high precision binder jetting technology, suitable for detailed and complex components. The moving parts in the DM P2500 have an accuracy down to 1 μm, with excellent repeatability in serial production.

    ...

  • The Digital Metal DM P2500 is built to the highest standard to endure real manufacturing year around. No expenses has been spared in our strive to make the DM P2500 suitable for serial production in high volumes with excellent repeatability, fine surface roughness and tight tolerances. To enable this, the machine is designed for precision controlled movements down to single microns. All this taken into account, together with efficient use, makes it possible to manufacture parts with a very competitive cost. Read more at https://digitalmetal.tech/

    DM P2500, MACHINE FACTS
    Printing system: Digital Metal, a high-precision binder jetting technology for metals
    Build volume: 203 x 180 x 69 mm (L x W x H)
    Typical productivity: 100 cm3/h
    Material deposition: Recoating with powder applicator
    Material recirculation: Yes, with no degradation
    Need for supports when printing: No
    Gas supply: No, protective gas not needed. Printing in room temperature
    Change over time between prints: 15-25 min
    Machine footprint: 2900 x 1000 x 1700 mm (L x W x H)
    Weight: 2,000 kg

    PROCESS CAPABILITY
    Materials: Stainless steel 316L & 17-4PH, Titanium Ti6Al4V folloing MIM standard ISO 22068. More materials under development such as MAR247, Inconel 625
    Density: Typically 96 % for stainless steel

    Resolution: 35 µm
    Wall thickness: >0,3 mm as a guide line
    Holes: > 0,2 mm as a guide line
    Surface roughness: on average Ra 6 µm
    Tolerance: at best ± 0,050 mm
    Repeatability: Standard deviation of 0,2 % within same batch and 0,4-0,5 % from batch to batch
    Suitable for serial production: Yes

PLEASE NOTE -- Supported browsers are: Internet Explorer - 10.0 and higher; Chrome - 55.0 and higher; Firefox - 50.0 and higher; Safari - 5.0 and higher. This program does not support compatibility view to run older browser software. Please make sure you are using the most up-to-date browser version to ensure complete use of the website.
For technical support with this webpage, please contact support.