Thermo Fisher Scientific

5350 NE Dawson Creek Dr
Hillsboro,  OR  97124-5793

United States
503-726-7500
https://thermofisher.com/em/
  • Booth: 947

Thermo Fisher Scientific, the world leader in serving science, provides innovative solutions for the materials science research community. Our multiscale, multimodal solutions provide the AM industry with imaging and characterization of powders and parts at nano- to atomic-level resolution. These are supported by Helical microCT, Plasma FIB/SEM, STEM, Avizo 3D visualization software and the new Explorer 4 Additive, an automated SEM that simultaneously characterizes size, shape and chemistry of powders or surface porosity and inclusions of parts. Our wide range of processing and analytical instruments makes us the only company that can both produce and verify the quality of 3D filaments. Co-rotating twin-screw extruders produce filament, with strands of uniform distribution and precise tolerances, for 3D printers with a wide range of raw materials. In-line and off-line IR, Raman and XR instrumentation validates filament uniformity and analyzes final printed parts for potential failure.


 Products

  • Defect characterization workflow
    Macroscopic failures of a 3D printed part are often due to microscopic defects created during the printing process. A multi-scale workflow is shown using different microscopy techniques....

  • Macroscopic failures of a 3D printed part are often due to microscopic defects created during the printing process. A multi-scale workflow is shown using different microscopy techniques.

  • HeliScan MicroCT
    HeliScan brings a new era of microCT to Materials Science by leveraging advanced helical scanning and iterative reconstruction technology to produce unsurpassed image fidelity....

  • The HeliScan microCT allows non-destructive 3D imaging of printed parts; with excellent dimensional characterization of both internal and external features. Surface roughness inside  a 3D printed fuel injector nozzle, for instance,  can be accurately measured.

  • Powder morphology and impurity
    The Thermo Scientific™ Explorer™ Additive is the proven solution for automatically and simultaneously monitoring the 3 most critical characteristics of powders for powder-bed and powder-fed additive manufacturing processes....

  • Shape and sizes of particles, as well as contaminant particles in the powder feedstock, can be reliably characterized with the Explorer Additive Automated SEM.

PLEASE NOTE -- Supported browsers are: Internet Explorer - 10.0 and higher; Chrome - 55.0 and higher; Firefox - 50.0 and higher; Safari - 5.0 and higher. This program does not support compatibility view to run older browser software. Please make sure you are using the most up-to-date browser version to ensure complete use of the website.
For technical support with this webpage, please contact support.