Innerspec Technologies

2940 Perrowville rd
Forest,  VA  24551-0369

United States
434-948-1301
  • Booth: 461

Innerspec Technologies, headquartered in Forest, Virginia, specializes in high-performance NDT solutions with a focus on Electro Magnetic Acoustic Transducer (EMAT) UT, Dry-Coupled UT (DCUT) and eddy current solutions. All of our solutions are couplant free allowing for inspection and measurement at high speeds and high temperatures. Our systems are custom engineered to be fully integrated into all production environments. We have over 25 years of experience designing, manufacturing and fielding industrial testing equipment for the metals industry with over 250 integrated systems installed in 27 countries improving quality and production for our customers.


 Products

  • PowerEC® CM
    The PowerEC® CM permits automated electrical conductivity measurement of non-ferrous metallic plates in production environments....

  • The PowerEC® CM permits automated electrical conductivity measurement of non-ferrous metallic plates in production environments. Conductivity measurements are required to verify proper alloy/temper and to detect problems during heat treatment. Two arrays of sensors are moved across the top and bottom surfaces of the plate while it travels through the measuring station, to provide a complete conductivity map. The technique meets the most stringent international standards for accuracy, and can be adapted to fit different coverage and speed requirements needs.

    Features

    • Non-contact Eddy Current technique.
    • Pass-through gantry configuration with independent calibration station.
    • Multi-sensor array permits fast scanning array of top and bottom surfaces of moving plate.
    • Maximum measurement error of +/-0.3%IACS. Meets MIL-STD-1537C for coverage and accuracy.
    • Proprietary technique automatically equalizes all the sensors during calibration process.
    • Automatic temperature and lift-off compensation during scanning.
    • Traversing speed of up to 3m/s. Sensor arrays can be can be adapted to meet different coverage and inspection speed requirements.
    • Seamlessly integrates with factory’s Level II for fully automated inspection.
    • Custom software with easy-to-interpret C-Scan-type views.
    • Built on Innerspec Technologies Operating Platform (ITOP) with NDT-Web™ user interface.
  • CAMUS 3D
    CAMUS 3D is an innovative solution that provides a cost-effective alternative to multi-axis inspection robots and gantries....

  • CAMUS 3D is an innovative solution that provides a cost-effective alternative to multi-axis inspection robots and gantries. The system integrates an array of 3D cameras that track the position of the probe with a high-performance PAUT instrument to provide accurate, high-resolution C-scans on parts with complex shapes. CAMUS 3D is a flexible, accurate, and affordable solution for inspection of composites and metallic components.

    Features

    • 3D cameras eliminate encoders, wiring, and electrical noise. Permits semi-automated inspections (hand scanning, wireless encoding), and eliminates encoders on system retrofits.
    • Phased Array UT (32 to 128 channels) sensor with custom shoes to adapt to any geometry.
    • 3D Cameras track probe movement and provide encoding and full traceability of the inspection results.
    • Permits direct detection of defects as small as 1/8” in diameter (3mm) in laminated composites. Detects scattered porosity through back-wall attenuation, and provides a full thickness map of the part.
    • Inspection cell up to 1000 sq./ft. (100 m2) of coverage. Larger cells available upon request.
    • Real-time C-scans provide immediate feedback of coverage and quality of inspection.
    • Optional multi-part simultaneous scanning in one inspection cell.
    • Upgradeable to fully-automated robotic inspection.
    • Permits adding PAUT to an existing line without the complex integration.
    • Qualified by major aerospace manufacturers.
    • SONIA® instrumentation with INSPECTVIEW® Software.