J&S Machine Inc

W6009 490th Ave
Ellsworth,  WI  54011-5235

United States
  • Booth: C10264


  • Garboli LPC500TE
    Garboli LPC500TE is a new narrow design of finishing machine. With a reduced dimension in the width and special designed enclosure, the LPC500TE can polish 6" OD tube with 6" CLR up to slightly over 90 degrees while maintain the 8” capacity rating....

  • With over 20 years of experience, Garboli has been developing and producing machinery for Grinding, Deburring, Buffing, Polishing and Finishing of metal products. The Garboli LPC 500 TE Planetary Grinding Machine is designed for the production of bent and straight tubes of stainless steel, brass, iron, and aluminum or any other metal having a round, oval, elliptical or irregular section. On request, the machine can be equipped with an inverter for variable abrasive belt speeds from 32 to 98 ft. /sec. The LPC 500TE is unique in its ability to work with 1D bends in the 6” tube capacity.

    Technical Features and Options: All Electric design, Dry or Wet Operation is Available, Special Narrow Head Version for Tight Bend Radius Sections, Workpiece capacity from 10 mm (1/2) up to 203 mm (8.0”) OD round tube or bar. Abrasive Belt Size: 2-3/8” x 62” for long abrasive life, Variable Workpiece Feed Speed: 3.25 fpm to 32.5 fpm, and easily connects to your dust collection system.

PLEASE NOTE -- Supported browsers are: Internet Explorer - 10.0 and higher; Chrome - 55.0 and higher; Firefox - 50.0 and higher; Safari - 5.0 and higher. This program does not support compatibility view to run older browser software. Please make sure you are using the most up to date browser version to ensure complete use of the website.

For Technical Support with this webpage, please contact support.