J&S Machine Inc

W6009 490th Ave
Ellsworth,  WI  54011-5235

United States
  • Booth: C10272


  • YLM CNC 16AS2-3A
    YLM CNC16AS2-3A is a dual tool stack bender with electric servo and pneumatic actions for low noise and accurate production in the small diameter tube bending field. Capacity of up to 5/8” OD tube in steel, copper, and aluminum, 1/2” in stainless....

  • The CNC16AS2-3A is the newest bender from YLM answering the call for a non-hydraulic small diameter dual stack bender. Powered by the YLM “NEW MOTION SOFTWARE” the bender is versatile to work with single or compound stacked tooling with a maximum capacity of 5/8” OD steel tube. With a maximum CLR of 60 mm or 2.360” this bender can reach bending speeds of 180 degrees per second, rotation speeds of 900 degrees per second, and feeding speeds of 57” per second. Weighing 2,100 lbs., requiring a 20 amp power circuit, and a length of 100” this bender easily fits into a company’s floor space.

    The CNC16AS2 joins an extensive bender line from YLM with capacities from 5/16” to 8” schedule 40 pipe. The benders models are available in NC, hydraulic, hybrid, or ALL-Electric configurations. The YLM benders readily work with auto-load systems, robots, or other work cell configurations while at the same time communicating with most CMMs on the market without interface software or additional components

PLEASE NOTE -- Supported browsers are: Internet Explorer - 10.0 and higher; Chrome - 55.0 and higher; Firefox - 50.0 and higher; Safari - 5.0 and higher. This program does not support compatibility view to run older browser software. Please make sure you are using the most up to date browser version to ensure complete use of the website.

For Technical Support with this webpage, please contact support.