Carell's New 40 Ton, T40 DIGI dual axis horizontal press bends with precision repeatability. Punch and powered back gauge are programmable. The work table is unobstructed. The hydraulic ram is below the work surface. Only the punch and die are above the work table so completely closed shapes and shorter bend to bend lengths are possible. DIGI Models have dual speeds and an air/oil cooler for continuous operation and automatic lubrication systems for low maintenance. The New DIGI-SIMPLYLOGIK software allows programming using degree of bend or point to point positions. Tool change is quick using rapid release tool holders. Machines use Eco-Friendly Technology reducing power consumption up to 20%. Along with a vast assortment of punches and dies, optional tooling is also available for straightening, pipe bending, punching, crimping, folding, shearing and more. Machine Capacity 40 Tons, 24” x 43” work surface, 9.8” punch stroke, 1.78 in/sec advance speed, 0.26 in/sec working speed. Precision in bending ± 0.004". Back gauge stroke is 39". The SIMPLYLOGIK HMI stores 550 programs for each axis (X & Y) with 15 steps each and can be set in inches or millimeters.