35 Samnah Crescent
Ingersoll,  ON  N5C 3J7

  • Booth: A1436


  • J-Tech In-Die Plastic Bushing Assembly
    J-Tech In-Die Assembly tooling and feeder for shouldered plastic bushings. System consists of a feeder that blows correctly orientated bushings into the stamping die and the In-Die tooling to install and final size the plastic bushing....

  • J-Tech with 20 years experience designing and suppling tooling and feeders for In-Die Assembly installing pierce nuts, clinch nuts, riv nuts, pierce studs, clinch studs, rivets, locator pins, teflon coated steel bushings, now supplies complete systems to install shouldered plastic bushing within the stamping die. The bushings are loaded into the feeder hopper, the stainless steel feeder bowl orientates the bushings, tangled bushings are auto ejected and bushings are blown from the feeder to the tooling installed within the stamping die. The bushing install is a two step process. The first step is to install the bushing into the stamping. The second step is seating the bushing and final sizing the ID. The tooling stages several bushing and releases one bushing at a time into the escapement. Press rates up to 35 strokes per minute.

    J-Tech also offers secondary assembly solutions. These include stand alone die sets to be used within customer's existing presses, robot load machines and operator load machines. For additional information stop by our booth A1436 at Fabtech 2018 or visit our website www.j-techdesign.com

PLEASE NOTE -- Supported browsers are: Internet Explorer - 10.0 and higher; Chrome - 55.0 and higher; Firefox - 50.0 and higher; Safari - 5.0 and higher. This program does not support compatibility view to run older browser software. Please make sure you are using the most up to date browser version to ensure complete use of the website.

For Technical Support with this webpage, please contact support.