Hardface Technologies by Postle  

5500 W 164th St
Cleveland,  OH  44142-1512

United States
216-265-9000
http://www.postle.com
  • Booth: C11117

Hardface Technologies by Postle offers a complete range of hardface welding alloys to protect equipment and components from wear caused by abrasion, impact, metal-to-metal friction, erosion and cavitation.  We offer over 45 years of experience in the manufacture of Hardfacing consumables. Postle can customize products to fit your needs and provide technical expertise on the application of welding products.

Manganese and iron base alloys, nickel and cobalt base alloys, and chromium and tungsten carbides are available as flux-cored wires, welding electrodes, tubular electrodes and thermal spray powders.  Users of our products include mining, dredging, steel and non-ferrous metals, railroad, pulp and paper, oil and gas, ship repair, heavy construction/earth-moving, foundries, quarries, recycling, agriculture, sugar cane, petrochemical, lumber and logging, brick and clay, wastewater treatment, power and energy, and food processing.

Our products are formulated to meet critical specifications while providing excellent operator appeal.

www.hardfacetechnologies.com      Contact Mike Korba @216-265-900 or mkorba@postle.com


 Show Specials

  • (Sep 14, 2018)

    POSTALLOY® A-Max Wear Plates

    Postalloy® A-Max Wear Plate is through-hardened abrasion resistant steel, much harder and more wear resistant than conventional AR400 or AR500.  Easy to Install.  Large or Small Areas

    • Hardness of 61-64 Rc.

    Postalloy® A-Max Wear Plate was designed to overcome the labor-intensive cost of hardfacing.

    • Small and light weight, the wear plate can be installed by any maintenance welder...in any position.
    • It can be quickly installed and less expensive than hardface welding…can be installed 10 times faster.
    • Less welding means less heat…less warpage and distortion.
    • Can be Flame or plasma cut…can be easily cut to any size.
    • Bolted or Welded in place.
    Installs with tack welds using Postalloy® 301 or 305 electrodes, or Postalloy® 30-FCG or 3044-FCG wire

 Press Releases

  • Postalloy® Tubular Hardfacing Electrodes are a unique concept in hardfacing technology. As a tubular electrode, they are filled with the highest percentage of carbide forming alloys, much more (20%+) than any other Tubular Flux-Cored Wire. This gives much better wear resistance and overall product performance. They were engineered to provide extended life to parts subject to wear due to abrasion, impact and erosion.
    And because they deposit faster and there is almost no waste, they are much more economical to use. Postalloy® Tubular Hardfacing Electrodes have a moisture resistant coating even under severe weather or high humidity.
    • Superior Abrasion Resistance
    • Better Recovery rate, 90% compared to 65%
    • 55% more inches of weld deposit per pound
    • Better Deposition rate, up to 3 times faster
    • Lower amperage with less dilution and better first pass hardness
    • De-slagging between layers is not necessary
    • Ease of use, can be used with AC or DC welding equipment
    • Storage - moisture resistant coating even under severe weather or high humidity

 Products

  • Postalloy 150HD Vanguard
    POSTALLOY® 150HD Vanguard is a tubular hardfacing electrode that provides a dense, heterogeneous deposit of vanadium - tungsten carbides, to enhance wear resistance....
     

  • POSTALLOY® 150HD Vanguard is a tubular hardfacing electrode that provides a dense, heterogeneous deposit of vanadium - tungsten carbides, along with other elements to enhance wear resistance, resulting in a very good combination of abrasion and impact resistance. This makes it superior to chromium carbide hardfacing alloys and almost equal to tungsten carbide in hardness at half the weight. Postalloy Vanguard 150HD is not a replacement for tungsten carbide overlays. However, it is a good alternative to tungsten carbide hardfacing alloys when they are too expensive or when MIG carbide embedding is not available or impractical. Unlike straight tungsten carbides, which are heavy and forced to the bottom of the weld puddle, the composition of Postalloy®150HD Vanguard is ideally balanced to provide a uniform distribution of vanadium - tungsten carbides throughout a tough steel matrix that takes more impact than both chromium and tungsten carbides. Also, it provides a very consistent wear rate and is designed for multiple re-applications. An excellent choice for many different hardfacing applications including mining, construction, recycling, dredging, forestry and sugar industries.
  • A-Max Wear Plate
    Postalloy® A-Max Wear Plate is through-hardened abrasion resistant steel, much harder and more wear resistant than conventional AR400 or AR500. Easy to Install. Large or Small Areas • Hardness of 61-64 Rc. ...
     

  • Postalloy® A-Max Wear Plate is through-hardened abrasion resistant steel, much harder and more wear resistant than conventional AR400 or AR500. Easy to Install. Large or Small Areas
    • Hardness of 61-64 Rc.
    Postalloy® A-Max Wear Plate was designed to overcome the labor-intensive cost of hardfacing.
    • Small and light weight, the wear plate can be installed by any maintenance welder...in any position.
    • It can be quickly installed and less expensive than hardface welding…can be installed 10 times faster.
    • Less welding means less heat…less warpage and distortion.
    • Can be Flame or plasma cut…can be easily cut to any size.
    • Bolted or Welded in place.
    • Installs with tack welds using Postalloy® 301 or 305 electrodes, or Postalloy® 30-FCG or 3044-FCG wire.

PLEASE NOTE -- Supported browsers are: Internet Explorer - 10.0 and higher; Chrome - 55.0 and higher; Firefox - 50.0 and higher; Safari - 5.0 and higher. This program does not support compatibility view to run older browser software. Please make sure you are using the most up to date browser version to ensure complete use of the website.

For Technical Support with this webpage, please contact support.