Superior Die Set Corp

900 W Drexel Ave
Oak Creek,  WI  53154-1935

United States
  • Booth: A1433


  • CageSaver©
    Superior Die Set Corporation is pleased to introduce a handy new diemaker’s accessory designed to virtually eliminate the possibility of Ball Bearing Retainer Cage damage during die handling and maintenance activities (compatible with all major brands)....

  • CageSaver© (Protective Device for Ball-Bearing Guiding Components in a Stamping Die)

    The costliest & most fragile element in a stamping die’s ball-bearing guidance system is the Retainer Cage which carries & secures the ball bearings in a predefined matrix arrangement.  It’s estimated that 90%+ of all catastrophic damage to Retainer Cages (of the suspended / hanging-type) occurs during DIE HANDLING activities–especially during the process of “flipping” the upper die shoe assembly prior to conducting die maintenance / repair activities.

    Superior Die Set Corporation (Oak Creek, Wisconsin) is pleased to introduce CageSaver©

    , a handy new diemaker’s accessory which is designed to virtually eliminate the possibility of this such Retainer Cage damage.  The CageSaver© product is configured to work with inch- and metric-series products, all standard nominal diameters, and all current styles of suspended Retainer Cage designs (A-type / D-type / L-type / M-type) currently available in North America.

    CageSaver’s© clever and clean design maintains the Retainer Cage in a fully- and safely retracted position during all die handling activities, and the Cage remains completely enclosed by a translucent polycarbonate sheath (optional) which shields the Cage and ball bearings from direct water / detergent exposure during pressure-washing of the die.  No longer will diemakers need to resort to such crude, inexact measures as rubber bands, tape, nylon tie straps, twist-wire, etc. for securing Retainer Cages in a safe position during die handling activities.  The CageSaver’s© design also employs a rugged elastomeric pad which is provided for safe and cushioned resting / storage of the upper die assembly upon the toolroom floor or on a storage rack.  The CageSaver© configuration furthermore allows the upper die shoe to be securely rested upon the lower die shoe with the Guideposts fully disengaged from, but in-line-with, the Bushings in the lower shoe.  Visit Superior Die Set at Booth A1433 to view product samples and inquire with questions.

PLEASE NOTE -- Supported browsers are: Internet Explorer - 10.0 and higher; Chrome - 55.0 and higher; Firefox - 50.0 and higher; Safari - 5.0 and higher. This program does not support compatibility view to run older browser software. Please make sure you are using the most up to date browser version to ensure complete use of the website.

For Technical Support with this webpage, please contact support.