CENIT North America Inc

691 N Squirrel Rd Ste 275
Auburn Hills,  MI  48326-2833

United States
248-309-3240
http://www.fastsuite.com
  • Booth: B37082


 Press Releases

  • At this year's FABTECH (Booth #B37082), CENIT will be demonstrating an integrated solution for the automated use of welding information from design to the program, optimized for the robot system.

    "Increase your degree of automation and increase productivity," was the previous motto. True, but the productivity gained is lost again if, due to a lack of data continuity between departments, e.g. information already defined in design cannot be used in robot programming. This is particularly important in the case of design changes or when programming variants.

    The solution lies in the consistent digitalization of the entire process

    Normally, all weld seam information required for production is defined and stored in the CAD model in the design department using standard CAD systems, and the model becomes the 3D master for all subsequent processes.

    With FASTSUITE Edition 2, we enable you to automatically extract the digital weld seam information from the 3D model and use it directly in offline programming without loss. For this purpose, so-called process geometries are automatically generated from the weld seam information and the parameters required for the process are set automatically. Manual input is no longer necessary. This considerably reduces the programming effort while at the same time increasing the quality, since incorrect entries can be more or less excluded.

    By the intelligent use of the information available in design, product variants or construction changes can be implemented much faster and more efficiently. The digitized overall process is the key to a successful and sustainable increase in productivity.

    Find more about how can you improve your digital Production at our booth at FABTECH at Booth B37082 or visit our website: www.fastsuite.com/DigitalProduction

    Press Contact CENIT North America, Inc.

    Luminita Dochia

    Head of Marketing & Sales Support

    Digital Factory Solutions

    691 N. Squirrel Rd., # 275

    Auburn Hills, MI 48326

    Phone: +1 248 309 3251

    E-Mail: l.dochia@cenit.com

    CENIT

    CENIT is your partner for successful digital transformation. With a broad solutions and services portfolio, CENIT enables clients to optimize their horizontal and vertical business processes. Our solutions are based on innovative technologies in: product lifecycle management, the digital factory, and enterprise information management. With interdisciplinary knowledge of the processes involved and their considerable expertise in the field, CENIT consultants provide customers with end-to-end advice to ensure that solutions are implemented with an understanding of the entire value chain. With a holistic approach and based on trusted partnerships, CENIT takes responsibility for solutions on behalf of our clients. From the initial consultation to the introduction of innovative IT solutions, right through to ensuring a cost-effective operation. The CENIT team adapts to each client, taking a practical approach, which enables measurable operational optimizations. CENIT has been helping prestigious customers in key industries to gain competitive advantages for over 25 years. CENIT has over 700 employees worldwide who work with customers from: automotive, aerospace, industrial equipment, tool and mold manufacturing, financial services, and trade and consumer products industries. www.cenit.com

    Our social media channels

    www.twitter.com/cenitag

    www.linkedin.com/company/cenit

    www.youtube.com/FASTSUITE

  • CENIT at FABTECH 2019 – Booth #B37082

    Offline Programming of robotic equipment: Synchronous Motion

    At this year’s FABTECH (Booth #B37082) CENIT will present the Synchronous robot team support, one of the newest modules of FASTSUITE Edition 2.

    Multi robot coordinated motion opens up a great amount of possibilities for the optimization that can be achieved using industrial robots, like using a 6 axis robot as a positioner and 6 axis robots to perform the process, sharing an external axis in between multiple robots, sharing a single load or tool via an offset TCP or simply to create safe an perfectly timed handshakes in between multiple robots.

    The increased complexity of the motion given by the number of axis and timings makes offline programing even more relevant for this type of processes. This tasks require the flexibility to combine different forms of coordination often within the same program, so the OLP software should flexible enough to simulate the complex handshakes and time synchronizations to ensure an accurate simulation.

    FASTSUITE Edition 2 enables the efficient and safe programming and simulation of cooperated robot teams, especially of robot cells where multiple robots are working simultaneously on workpieces that are dynamically moved by workpiece positioners. With this new function it is no longer necessary to manually synchronize and optimize the robot operations, and it also enables a realistic work cell setup with only one positioner definition for multiple robots, making previous workarounds obsolete.

    Some of the highlights offered by the new FASTSUITE functionalities:

    - Support of several work cell types and robot cell configurations

    - Up to 16 robots can be included and synchronized

    - Independent and individual programming of each robot

    - Special synchronization event to define handshakes where the robots will wait until a specific move is achieved by all units

    - Special synchronization event to define time start and end of time synchronization zones where the robots will perform identical motion times

    - Synchronization command to automatically define the external axes positions onto the programmed tool paths of the robots

    - Several cooperation modes are supported

    Find more about offline programming at our booth at FABTECH at Booth B37082 or visit our website www.fastsuite.com/welding

    Press Contact CENIT North America, Inc.

    Luminita Dochia

    Head of Marketing & Sales Support

    Digital Factory Solutions

    691 N. Squirrel Rd., # 275

    Auburn Hills, MI 48326

    Phone: +1 248 309 3251

    E-Mail: l.dochia@cenit.com

    CENIT

    CENIT is your partner for successful digital transformation. With a broad solutions and services portfolio, CENIT enables clients to optimize their horizontal and vertical business processes. Our solutions are based on innovative technologies in: product lifecycle management, the digital factory, and enterprise information management. With interdisciplinary knowledge of the processes involved and their considerable expertise in the field, CENIT consultants provide customers with end-to-end advice to ensure that solutions are implemented with an understanding of the entire value chain. With a holistic approach and based on trusted partnerships, CENIT takes responsibility for solutions on behalf of our clients. From the initial consultation to the introduction of innovative IT solutions, right through to ensuring a cost-effective operation. The CENIT team adapts to each client, taking a practical approach, which enables measurable operational optimizations. CENIT has been helping prestigious customers in key industries to gain competitive advantages for over 25 years. CENIT has over 700 employees worldwide who work with customers from: automotive, aerospace, industrial equipment, tool and mold manufacturing, financial services, and trade and consumer products industries. www.cenit.com

    Our social media channels

    www.twitter.com/cenitag

    www.linkedin.com/company/cenit

    www.youtube.com/FASTSUITE


 Products

  • Automated use of the CAD model in welding
    At this year's FABTECH (Booth #B37082), CENIT will be demonstrating an integrated solution for the automated use of welding information from design to the program, optimized for the robot system. ...
     

  • Intelligent automated use of the CAD model in welding programming

    At this year's FABTECH (Booth #B37082), CENIT will be demonstrating an integrated solution for the automated use of welding information from design to the program, optimized for the robot system.

    "Increase your degree of automation and increase productivity," was the previous motto. True, but the productivity gained is lost again if, due to a lack of data continuity between departments, e.g. information already defined in design cannot be used in robot programming. This is particularly important in the case of design changes or when programming variants.

    The solution lies in the consistent digitalization of the entire process

    Normally, all weld seam information required for production is defined and stored in the CAD model in the design department using standard CAD systems, and the model becomes the 3D master for all subsequent processes.

    With FASTSUITE Edition 2, we enable you to automatically extract the digital weld seam information from the 3D model and use it directly in offline programming without loss. For this purpose, so-called process geometries are automatically generated from the weld seam information and the parameters required for the process are set automatically. Manual input is no longer necessary. This considerably reduces the programming effort while at the same time increasing the quality, since incorrect entries can be more or less excluded.

    By the intelligent use of the information available in design, product variants or construction changes can be implemented much faster and more efficiently. The digitized overall process is the key to a successful and sustainable increase in productivity.

    Find more about how can you improve your digital Production at our booth at FABTECH at Booth B37082 or visit our website: www.fastsuite.com/DigitalProduction

For Technical Support with this webpage, please contact support.