Valgro India Limited

2nd Fl Shailly Square
NH No 8 Virat Nagar Cross Rd
Ahmedabad,  Gujarat  382350

India
+91 79 22972603
http://www.brushingmachine.com
  • Booth: A6476


 Press Releases

  • Anti-finger print coating is always applied after other processes. such as hairline, satin, mirror, vibration, bead blasted and coloring, which makes sure the sheet cleaning, shining and color consistency without any fingerprint stains.  

    It is a nice choice no matter for interior or exterior building decoration, especially some public area which people can reach and touch a lot.

    1. World 1st Shortest Water base Coating line
    2. Energy &space saving
    3. Anti finger Anti-Stain Coating Line
    4. Acid Resistance and Alkaline Resistance
    5. Anti finger Anti-Stain Coating Line

    http://www.brushingmachine.com/anti_finger_coating.html

    for more detail please mail us sales@valgroabrasives.com

    Oven Curable Cathodic Electrophoretic Coating , Develop by Valgro India Limited

    Introduction :

    • VALGRO E-KOTE is an innovative Electrolytically-Cathodic-Phoretic coating process for both decorative and protective functional purpose.
    • A clear coating to protect the metal surface from oxidation and to enhance the wear resistance which as a result of its process characteristics is environmentally friendly.

    Purpose: To achieve protecting as well as smooth thin layer coating in all areas with a decorative effect.

    Objective :

    • Anti-finger coating
    • Anti-rust coating
    • Quality coating in minimum possible time
    • Decorative advantage of clear coating

    Color Available :

    • Original Clear Coat
    • Satin Matt
    • Gloss Black
    • Matt Black
    • Copper Colour
    • Brass Colour
    • Golden Colour
    • Ruby Red

  • Valgro-Hyzer Classic Series Wide Belt Deburring, Edge Rounding, and Finishing Machine
     

    Laser Cut parts Burr removal + Edge rounding, Inside + Outside Contours, Cleaning + Deburring

    Valgro Offer Four Type Deburring and Edge rounding machine for Sheet metal Processing Industries.

    The Classic Series deburring machine is suitable for metal finishing and deburring at an affordable price with many standard features. The Classic Series Abrasive belt grinding machine for deburring and finishing sheet metal and other flat parts that need a radius edge. This is an automatic feed-tough machine with a belt, the machine will deburr and sand a radius to the sharp edge on cut out parts.

    Sanding into the conveyor belt is possible without damaging the belt. The machine works with steel, stainless steel, aluminum and many other types of metal

    Deburring

    The burr can vary when punching or laser cutting your materials. Burrs created via laser cutting and punching adhere to the material in various strengths. Therefore, finding a comprehensive deburring solution is crucial.

    Edge rounding

    A good edge rounding result is characterized by removing the sharpness on the edges of your laser-cut or punched materials. This prevents injuries that may be caused by handling the material, while simultaneously improving downstream processing. Furthermore, a radius at the edge of the materials also improves paint adhesion.

    Oxide removal

    If you are cutting via a CO2-laser with oxygen, the Classic Hybrid can remove any oxide layers along the cutting edge of the material.

    Surface finish

    Punched and laser-cut parts often require high demands on the surface. A beautiful surface is a pleasant side effect of the deburring process. In some cases, a specific type of surface finish could be necessary.

    http://www.brushingmachine.com/classic-series-wide-belt-brush-deburring-edge-rounding-machine.html

  • Samarth Fabrika Series Polishing Machine For Stainless Steel Sheet Metal Fabrication Industries

    SAMARTH Fabrika Series Stainless steel Sheet & Blank Polishing machine Suitable for Stainless steel Fabrication Industries for in-house Polishing work. Increase profit by reducing cost

    Widely used in stainless steel fabrication, like Airport, Architectural wall panels, Beverage & Food Processing Equipment, Bus shelters, Elevators doors and interiors, Escalator trim, Hospital Furniture's, Metro and Railways, Mass transit equipment, Pharma and Dairy Equipment, Restaurant and kitchen equipment, Shipbuilding, Application are endless.

    Samarth Project Series Polishing Machine For Stainless Steel Service center Wearhouse and Mill 

    The polishing of coils and sheets is one of the most value-added operations offered by service centers. For this application, Valgro has developed various models include high productivity, flexibility in configuration, and lower operating costs. These machines are available for both dry and wet processing.

    Valgro Scotchbrite* brush finish is a fast and emerging process as a preferred finish by users. Valgro offers an endless range of finishing effects in terms of brightness and finishing easy to achieved Matt, Hair-Line, Satin, No. 4, 2J Finish.


 Products

  • Deburring, Finishing & Edge Rounding MAchine
    Valgro Samarth classic Series deburring machine suitable for Sheet Metal press punch, Laser cut, and Plasma cut high definition parts...
     

  • Valgro-Hyzer Classic Series Planetary Rotary Brush
    Deburring & Edge Rounding Machine
     

    Laser Cut parts Burr removal + Edge rounding, Inside + Outside Contours, Cleaning + Deburring

    Valgro Offer Four Type Deburring and Edge rounding machine for Sheet metal Processing Industries.

    The Classic Series deburring machine suitable for metal finishing and deburring at an affordable price with many standard features. The Classic Series Abrasive belt grinding machine for deburring and finishing sheet metal and other flat parts that needs a radius edge. This is an automatic feed-tough machine with a belt, the machine will deburr and sand a radius to the sharp edge on cut out parts.

    Sanding into the conveyor belt is possible without damaging the belt. The machine works with steel, stainless steel, aluminum and many other types of metal

    Deburring

    The burr can vary when punching or laser cutting your materials. Burrs created via laser cutting and punching adhere to the material in various strengths. Therefore, finding a comprehensive deburring solution is crucial.

    Edge rounding

    A good edge rounding result is characterized by removing the sharpness on the edges of your laser-cut or punched materials. This prevents injuries that may be caused by handling the material, while simultaneously improving downstream processing. Furthermore, a radius at the edge of the materials also improves paint adhesion.

    Oxide removal

    If you are cutting via a CO2-laser with oxygen, the Classic Hybrid can remove any oxide layers along the cutting edge of the material.

    Surface finish

    Punched and laser-cut parts often require high demands on the surface. A beautiful surface is a pleasant side effect of the deburring process. In some cases, a specific type of surface finish could be necessary.

    Typical process applications covered by this machine:

    • Deburring punched, nibbled, sheared or laser-cut sheet metal parts.
    • deburr and sand a radius to the sharp edge on cut out parts
    • Uniform sanding on all edges, leaving a fine scratch pattern on the surface.
    • Deburring of all edges in one pass on laser cut or stamped parts
    • Calibrating or keying carbon, rubber, wood or other soft materials.
    • Grain finishing and stock removal of any material.
    • Satin finishing of metal Stainless Steel sheet and strip.

For Technical Support with this webpage, please contact support.