Heraeus

1520 Broadmoor Blvd.
Suite C
Buford,  GA  30518-7500

United States
678-835-5764
https://www.heraeus.com/en/hng/products_and_solutions/infrared_emitters_and_systems/gas_catalytic_infrared_systems/gas_catalytic_ir_overview/gas_catalytic_ir.html

• Booth: B4855

 Press Releases

• Refurbishing Gas Catalytic IR Panels Improves Performance (Aug 25, 2022)

  Heraeus Noblelight offers a full program for the remanufacturing / refurbishment of gas catalytic IR panels and a service to bring the reflective surfaces of the oven back to full efficiency. We can carry out refurbishment of gas catalytic heaters manufactured by other companies and our superior catalyst impregnation process will make them more efficient than when they were new. The refurbishment process involves rebuilding the heater with a new catalytic pad and screen, new pre heat element and thermo switch, followed by testing.

  What we offer for remanufacturing of gas catalytic IR panels:

  

  • Inspect preheater elements, replace as necessary

  • Inspect Safety Switches, replace as necessary

  • Replace catalyst pad

  • Replace protective scrim

  • Bench test for BTU output

  • Package and return

  >Learn more

• Infrared Booster Oven Optimizes Production (Aug 25, 2022)

  Production bottlenecks often occur as a result of tougher production demands, where the existing drying system can no longer keep pace. This can often be solved by installing an infrared booster section, which is positioned in front of the existing drying system.

  The booster section rapidly brings the product up to temperature allowing line speeds to be increased accordingly. For some products this can equate to savings of up to 50% of the time required to dry or cure the coating.

  Next to the classic booster - an infrared module placed in front of another heating module - a booster can also be placed after the existing oven or in between.

  Your advantages using infrared boosters:

  Saving time by faster heating

  Saving space through shorter drying distances

  Saving energy through fast reaction times

  >Learn more

• Infrared heat for metal processing - preheating, coatings, reflow-processes (Aug 25, 2022)

  Protective coatings curing on metal sheets, topcoat drying on metal housings, preheating before alloy or reflow processes - the processing of metal parts requires many heat processes. It is worthwhile to pay attention to the energy efficiency of the heat source.

  Infrared emitters are precisely adjusted to the product and process. This is important because the properties of the products have a major influence on the heating. Flat sheets or solid blocks heat up at different rates. High-gloss metals reflect very strongly, while dark surfaces absorb the heat very well. Medium-wave emitters dry faster on the surface, while short-wave emitters penetrate deeper.

  Your advantages with Infrared:

  • Exactly matched infrared emitters save time, space and energy
  • Infrared emitters have a high reliability
  • Precise control - switch on and off quickly

  >Learn more

 Products